X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fhighbank.h;h=e15b572e41136f9ce89ce8088f52997e30d33e14;hb=a1dc980d88a5c9c2b99251c8d8299b0c8948de73;hp=e7459c179ba1b582934c7e689ce37479dcc3511a;hpb=c2120fbfbc4d1f6953228f86be8bdbf38bacfdab;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index e7459c1..e15b572 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -7,16 +7,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_L2_OFF
+#include <config_distro_defaults.h>
 
-#define CONFIG_SYS_NO_FLASH
-#define CFG_HZ				1000
-#define CONFIG_SYS_HZ			CFG_HZ
+#define CONFIG_SYS_DCACHE_OFF
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_FIT
 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
 
+#define CONFIG_SYS_TIMER_RATE		(150000000/256)
+#define CONFIG_SYS_TIMER_COUNTER	(0xFFF34000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
 /*
  * Size of malloc() pool
  */
@@ -27,14 +27,13 @@
 #define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
 #define CONFIG_CONS_INDEX		0
 
-#define CONFIG_BAUDRATE			38400
-
 #define CONFIG_BOOTCOUNT_LIMIT
 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
 #define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
 #define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
 
 #define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
@@ -42,51 +41,34 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_DOS_PARTITION
-
 #define CONFIG_CALXEDA_XGMAC
 
-/* PXE support */
-#define CONFIG_BOOTP_PXE
-#define CONFIG_BOOTP_PXE_CLIENTARCH	0x100
-#define CONFIG_BOOTP_VCI_STRING		"U-boot.armv7.highbank"
-
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_PXE
-#define CONFIG_MENU
-
-#define CONFIG_BOOTDELAY		2
+#define CONFIG_SCSI
+
+#define CONFIG_BOOT_RETRY_TIME		-1
+#define CONFIG_RESET_TO_RETRY
+
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP		/* undef to save memory		 */
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PROMPT		"Highbank #"
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					 sizeof(CONFIG_SYS_PROMPT)+16)
 
 #define CONFIG_SYS_LOAD_ADDR		0x800000
+#define CONFIG_SYS_64BIT_LBA
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
+ * The DRAM is already setup, so do not touch the DT node later.
  */
-#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_NR_DRAM_BANKS		0
 #define PHYS_SDRAM_1_SIZE		(4089 << 20)
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)