X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fhighbank.h;h=7f331a6a73cdc5975dd9be2a6bdc74787476ac11;hb=a726075911c231e81ecbe12825840b6183bc10da;hp=9c857883530e76058e873a7149fb495994383b9a;hpb=37fc0ed268dc5acacd3a83adafa26eb1a84e90af;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 9c85788..7f331a6 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -1,33 +1,28 @@
 /*
  * Copyright 2010-2011 Calxeda, Inc.
  *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_L2_OFF
+#include <config_distro_defaults.h>
+
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_SYS_THUMB_BUILD
 
 #define CONFIG_SYS_NO_FLASH
-#define CFG_HZ				1000
-#define CONFIG_SYS_HZ			CFG_HZ
+#define CONFIG_SYS_GENERIC_BOARD
 
-#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
 #define CONFIG_FIT
 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
 
+#define CONFIG_SYS_TIMER_RATE		(150000000/256)
+#define CONFIG_SYS_TIMER_COUNTER	(0xFFF34000 + 0x4)
+#define CONFIG_SYS_TIMER_COUNTS_DOWN
+
 /*
  * Size of malloc() pool
  */
@@ -38,10 +33,15 @@
 #define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
 #define CONFIG_CONS_INDEX		0
 
-#define CONFIG_BAUDRATE			38400
-#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE			115200
+
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
+#define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
+#define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
 
 #define CONFIG_MISC_INIT_R
+#define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
@@ -49,64 +49,49 @@
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					CONFIG_SYS_SCSI_MAX_LUN)
 
-#define CONFIG_DOS_PARTITION
+#define CONFIG_CALXEDA_XGMAC
 
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_ELF
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_LOADS
 #define CONFIG_CMD_SCSI
-#define CONFIG_CMD_EXT2
 
-#define CONFIG_BOOTDELAY		2
+#define CONFIG_BOOT_RETRY_TIME		-1
+#define CONFIG_RESET_TO_RETRY
+
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_LONGHELP		/* undef to save memory		 */
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_PROMPT		"Highbank #"
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					 sizeof(CONFIG_SYS_PROMPT)+16)
 
 #define CONFIG_SYS_LOAD_ADDR		0x800000
+#define CONFIG_SYS_64BIT_LBA
 
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE		(128*1024)	/* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ		(4*1024)	/* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ		(4*1024)	/* FIQ stack */
-#endif
 
 /*-----------------------------------------------------------------------
  * Physical Memory Map
+ * The DRAM is already setup, so do not touch the DT node later.
  */
-#define CONFIG_NR_DRAM_BANKS		1
+#define CONFIG_NR_DRAM_BANKS		0
 #define PHYS_SDRAM_1_SIZE		(4089 << 20)
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)
 
-/* Room required on the stack for the environment data */
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_IS_NOWHERE
+/* Environment data setup
+*/
+#define CONFIG_ENV_IS_IN_NVRAM
+#define CONFIG_SYS_NVRAM_BASE_ADDR	0xfff88000	/* NVRAM base address */
+#define CONFIG_SYS_NVRAM_SIZE		0x8000		/* NVRAM size */
+#define CONFIG_ENV_SIZE			0x2000		/* Size of Environ */
+#define CONFIG_ENV_ADDR			CONFIG_SYS_NVRAM_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_TEXT_BASE		0x00001000
+#define CONFIG_SYS_TEXT_BASE		0x00008000
 #define CONFIG_SYS_INIT_SP_ADDR		0x01000000
 #define CONFIG_SKIP_LOWLEVEL_INIT