X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fhighbank.h;h=2566867e821b46a7ab05b91bb1592cfdea447d0e;hb=29d280c88a1ff331dce2d4c7a5aaf2402aa0fd8a;hp=510741bafb8b1a6f8a1440db4caca3b2325de300;hpb=312a6c016a2d81aa3fbc605f5c0c315b6a4e3464;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 510741b..2566867 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -1,18 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright 2010-2011 Calxeda, Inc.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#include <config_distro_defaults.h>
-
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_THUMB_BUILD
-
-#define CONFIG_SYS_NO_FLASH
 
 #define CONFIG_SYS_BOOTMAPSZ		(16 << 20)
 
@@ -25,21 +19,11 @@
  */
 #define CONFIG_SYS_MALLOC_LEN		(512 * 1024)
 
-#define CONFIG_PL011_SERIAL
 #define CONFIG_PL011_CLOCK		150000000
 #define CONFIG_PL01x_PORTS		{ (void *)(0xFFF36000) }
-#define CONFIG_CONS_INDEX		0
 
-#define CONFIG_BAUDRATE			115200
-
-#define CONFIG_BOOTCOUNT_LIMIT
-#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
 #define CONFIG_SYS_BOOTCOUNT_LE		/* Use little-endian accessors */
-#define CONFIG_SYS_BOOTCOUNT_ADDR	0xfff3cf0c
 
-#define CONFIG_MISC_INIT_R
-#define CONFIG_LIBATA
-#define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	5
 #define CONFIG_SYS_SCSI_MAX_LUN		1
@@ -51,7 +35,6 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_SCSI
 
 #define CONFIG_BOOT_RETRY_TIME		-1
 #define CONFIG_RESET_TO_RETRY
@@ -60,35 +43,27 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of cmd args */
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					 sizeof(CONFIG_SYS_PROMPT)+16)
 
 #define CONFIG_SYS_LOAD_ADDR		0x800000
 #define CONFIG_SYS_64BIT_LBA
 
-
 /*-----------------------------------------------------------------------
  * Physical Memory Map
  * The DRAM is already setup, so do not touch the DT node later.
  */
-#define CONFIG_NR_DRAM_BANKS		0
 #define PHYS_SDRAM_1_SIZE		(4089 << 20)
 #define CONFIG_SYS_MEMTEST_START	0x100000
 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1_SIZE - 0x100000)
 
 /* Environment data setup
 */
-#define CONFIG_ENV_IS_IN_NVRAM
 #define CONFIG_SYS_NVRAM_BASE_ADDR	0xfff88000	/* NVRAM base address */
 #define CONFIG_SYS_NVRAM_SIZE		0x8000		/* NVRAM size */
 #define CONFIG_ENV_SIZE			0x2000		/* Size of Environ */
 #define CONFIG_ENV_ADDR			CONFIG_SYS_NVRAM_BASE_ADDR
 
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_TEXT_BASE		0x00008000
 #define CONFIG_SYS_INIT_SP_ADDR		0x01000000
 #define CONFIG_SKIP_LOWLEVEL_INIT