X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgw_ventana.h;h=620f9501d255741c921d699713fd779a3e9b4774;hb=1fc4e6f486cc1e9d2dcf0ba86e6021c3d83dce51;hp=33983907f2283bb876a9781bbe8fd9a9beb63e0a;hpb=519fdde9e6a6ebce7dc743b4f5621503d25b7a45;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 3398390..620f950 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -7,6 +7,17 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
+/* SPL */
+#define CONFIG_SPL_NAND_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+/*
+#define CONFIG_SPL_SATA_SUPPORT
+*/
+/* Location in NAND to read U-Boot from */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)
+
+#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
 #include "mx6_common.h"
 #define CONFIG_MX6
 #define CONFIG_DISPLAY_CPUINFO         /* display cpu info */
@@ -24,6 +35,8 @@
 #define CONFIG_SERIAL_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 
@@ -48,7 +61,7 @@
   #define CONFIG_SPI_FLASH_BAR
   #define CONFIG_SPI_FLASH_WINBOND
   #define CONFIG_SF_DEFAULT_BUS              0
-  #define CONFIG_SF_DEFAULT_CS               (0|(IMX_GPIO_NR(3, 19)<<8))
+  #define CONFIG_SF_DEFAULT_CS               0
 					     /* GPIO 3-19 (21248) */
   #define CONFIG_SF_DEFAULT_SPEED            30000000
   #define CONFIG_SF_DEFAULT_MODE             (SPI_MODE_0)
@@ -82,7 +95,9 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_SPEED		  100000
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_I2C_GSC			0
+#define CONFIG_I2C_PMIC			1
 
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
@@ -126,6 +141,7 @@
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
+#define CONFIG_PCI_FIXUP_DEV
 #define CONFIG_PCIE_IMX
 #endif
 
@@ -136,6 +152,8 @@
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
+#define CONFIG_POWER_LTC3676
+#define CONFIG_POWER_LTC3676_I2C_ADDR  0x3c
 
 /* Various command support */
 #include <config_cmd_default.h>
@@ -149,6 +167,7 @@
 #define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_BOOTZ
 #define CONFIG_CMD_GSC
+#define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
 #define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
 #define CONFIG_LZO
@@ -188,7 +207,22 @@
 #define CONFIG_USB_ETH_CDC
 #define CONFIG_NETCONSOLE
 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
-#define CONFIG_USB_HUB_MIN_POWER_ON_DELAY 1200
+
+/* Framebuffer and LCD */
+#define CONFIG_VIDEO
+#define CONFIG_VIDEO_IPUV3
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_BMP_16BPP
+#define CONFIG_VIDEO_LOGO
+#define CONFIG_IPUV3_CLK          260000000
+#define CONFIG_CMD_HDMIDETECT
+#define CONFIG_CONSOLE_MUX
+#define CONFIG_IMX_HDMI
+#define CONFIG_IMX_VIDEO_SKIP
 
 /* serial console (ttymxc1,115200) */
 #define CONFIG_CONS_INDEX              1