X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgrasshopper.h;h=8cde96a7659e6a96c94672c64f0c7246de8a2aab;hb=adad96e60d0eb1bbc4d0b96c89decf385a426e42;hp=07e8a4908d93ba513e972ac950ac35fb0ee32fdb;hpb=219f4788d33b04e394d4ade1feaedc0292acc790;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index 07e8a49..8cde96a 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -4,40 +4,17 @@
  *
  * Configuration settings for the grasshopper (ICnova AP7000) board
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 #ifndef __GRASSHOPPER_CONFIG_H
 #define __GRASSHOPPER_CONFIG_H
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AVR32
 #define CONFIG_AT32AP
 #define CONFIG_AT32AP7000
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ			1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
@@ -85,6 +62,9 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_USART1
 #define CONFIG_USART_ID			1
 
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+
 /* User serviceable stuff */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -94,17 +74,7 @@
 
 #define CONFIG_BAUDRATE			115200
 
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
 #define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		"Press SPACE to abort autoboot in %d" \
-					" seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-#define CONFIG_AUTOBOOT_STOP_STR	" "
 
 /*
  * After booting the board for the first time, new ethernet addresses
@@ -122,12 +92,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-/* remove unneeded commands */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-
 /* add useful commands */
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
@@ -135,7 +99,6 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
 
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_CMDLINE_EDITING
 
@@ -174,14 +137,12 @@
 					 CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN		(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN	(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR		(EBI_SDRAM_BASE + 0x00400000)
 #define CONFIG_SYS_BOOTPARAMS_LEN	(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \