X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgrasshopper.h;h=274175ba0f00297c67df452e243ef8681c8b3213;hb=e16e137c377c8b96d8d91263d0b6d8470169f841;hp=c288b39f2d569d28a1eceb648341b8acae474d21;hpb=5b9c79a81db80c3f9e50c77477957cd803429af8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/grasshopper.h b/include/configs/grasshopper.h
index c288b39..274175b 100644
--- a/include/configs/grasshopper.h
+++ b/include/configs/grasshopper.h
@@ -11,17 +11,10 @@
 
 #include <asm/arch/hardware.h>
 
-#define CONFIG_AVR32
 #define CONFIG_AT32AP
 #define CONFIG_AT32AP7000
 
 /*
- * Timer clock frequency. We're using the CPU-internal COUNT register
- * for this, so this is equivalent to the CPU core clock frequency
- */
-#define CONFIG_SYS_HZ			1000
-
-/*
  * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
  * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
  * PLL frequency.
@@ -69,6 +62,9 @@
 #define CONFIG_USART_BASE		ATMEL_BASE_USART1
 #define CONFIG_USART_ID			1
 
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_EARLY_INIT_R
+
 /* User serviceable stuff */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -78,17 +74,7 @@
 
 #define CONFIG_BAUDRATE			115200
 
-/*
- * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
- * data on the serial line may interrupt the boot sequence.
- */
 #define CONFIG_BOOTDELAY		1
-#define CONFIG_AUTOBOOT
-#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT		"Press SPACE to abort autoboot in %d" \
-					" seconds\n", bootdelay
-#define CONFIG_AUTOBOOT_DELAY_STR	"d"
-#define CONFIG_AUTOBOOT_STOP_STR	" "
 
 /*
  * After booting the board for the first time, new ethernet addresses
@@ -106,12 +92,6 @@
 /*
  * Command line configuration.
  */
-#include <config_cmd_default.h>
-
-/* remove unneeded commands */
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_SETGETDCR
-
 /* add useful commands */
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
@@ -158,14 +138,12 @@
 					 CONFIG_SYS_INTRAM_SIZE)
 
 #define CONFIG_SYS_MALLOC_LEN		(256*1024)
-#define CONFIG_SYS_DMA_ALLOC_LEN	(16384)
 
 /* Allow 4MB for the kernel run-time image */
 #define CONFIG_SYS_LOAD_ADDR		(EBI_SDRAM_BASE + 0x00400000)
 #define CONFIG_SYS_BOOTPARAMS_LEN	(16 * 1024)
 
 /* Other configuration settings that shouldn't have to change all that often */
-#define CONFIG_SYS_PROMPT		"U-Boot> "
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \