X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgr_ep2s60.h;h=ed2dd2a847be9e231d43c47f67ab770ee2af9132;hb=HEAD;hp=ae25fb291e0d285b809734521447b7691388368a;hpb=d3c23a790fb24f9cb5cc467b81b0c3ad3eeb1f96;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/gr_ep2s60.h b/include/configs/gr_ep2s60.h deleted file mode 100644 index ae25fb2..0000000 --- a/include/configs/gr_ep2s60.h +++ /dev/null @@ -1,356 +0,0 @@ -/* Configuration header file for Gaisler Research AB's Template - * design (GPL Open Source SPARC/LEON3 96MHz) for Altera NIOS - * Development board Stratix II edition, with the FPGA device - * EP2S60. - * - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2008 - * Daniel Hellstrom, Gaisler Research, daniel@gaisler.com. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H__ -#define __CONFIG_H__ - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_LEON3 /* This is an LEON3 CPU */ -#define CONFIG_LEON 1 /* This is an LEON CPU */ -/* Altera NIOS Development board, Stratix II board */ -#define CONFIG_GR_EP2S60 1 - -/* CPU / AMBA BUS configuration */ -#define CONFIG_SYS_CLK_FREQ 96000000 /* 96MHz */ - -/* Number of SPARC register windows */ -#define CFG_SPARC_NWINDOWS 8 - -/* Define this is the GR-2S60-MEZZ mezzanine is available and you - * want to use the USB and GRETH functionality of the board - */ -#undef GR_2S60_MEZZ - -#ifdef GR_2S60_MEZZ -#define USE_GRETH 1 -#define USE_GRUSB 1 -#endif - -/* - * Serial console configuration - */ -#define CONFIG_BAUDRATE 38400 /* ... at 38400 bps */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* Partitions */ -#define CONFIG_DOS_PARTITION -#define CONFIG_MAC_PARTITION -#define CONFIG_ISO_PARTITION - -/* - * Supported commands - */ -#include - -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_AMBAPP -#define CONFIG_CMD_PING -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_IRQ - -/* USB support */ -#if USE_GRUSB -#define CONFIG_USB_UHCI -#define CONFIG_CMD_FAT -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_USB -#define CONFIG_USB_STORAGE -/* Enable needed helper functions */ -#define CFG_DEVICE_DEREGISTER /* needs device_deregister */ -#endif - -/* - * Autobooting - */ -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs console=ttyS0,38400 root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs console=ttyS0,${baudrate} root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 40000000 ${bootfile};run nfsargs addip;bootm\0" \ - "scratch=40800000\0" \ - "getkernel=tftpboot \$\(scratch\)\ \$\(bootfile\)\0" \ - "bootargs=console=ttyS0,38400 root=/dev/nfs rw nfsroot=192.168.0.20:/export/rootfs ip=192.168.0.207:192.168.0.20:192.168.0.1:255.255.255.0:ml401:eth0\0" \ - "" - -#define CONFIG_NETMASK 255.255.255.0 -#define CONFIG_GATEWAYIP 192.168.0.1 -#define CONFIG_SERVERIP 192.168.0.20 -#define CONFIG_IPADDR 192.168.0.207 -#define CONFIG_ROOTPATH /export/rootfs -#define CONFIG_HOSTNAME ml401 -#define CONFIG_BOOTFILE /uImage - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* Memory MAP - * - * Flash: - * |--------------------------------| - * | 0x00000000 Text & Data & BSS | * - * | for Monitor | * - * | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| * - * | UNUSED / Growth | * 256kb - * |--------------------------------| - * | 0x00050000 Base custom area | * - * | kernel / FS | * - * | | * Rest of Flash - * |~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~| - * | END-0x00008000 Environment | * 32kb - * |--------------------------------| - * - * - * - * Main Memory: - * |--------------------------------| - * | UNUSED / scratch area | - * | | - * | | - * | | - * | | - * |--------------------------------| - * | Monitor .Text / .DATA / .BSS | * 512kb - * | Relocated! | * - * |--------------------------------| - * | Monitor Malloc | * 128kb (contains relocated environment) - * |--------------------------------| - * | Monitor/kernel STACK | * 64kb - * |--------------------------------| - * | Page Table for MMU systems | * 2k - * |--------------------------------| - * | PROM Code accessed from Linux | * 6kb-128b - * |--------------------------------| - * | Global data (avail from kernel)| * 128b - * |--------------------------------| - * - */ - -/* - * Flash configuration (8,16 or 32 MB) - * TEXT base always at 0xFFF00000 - * ENV_ADDR always at 0xFFF40000 - * FLASH_BASE at 0xFC000000 for 64 MB - * 0xFE000000 for 32 MB - * 0xFF000000 for 16 MB - * 0xFF800000 for 8 MB - */ -/*#define CFG_NO_FLASH 1*/ -#define CFG_FLASH_BASE 0x00000000 -#define CFG_FLASH_SIZE 0x00400000 /* FPGA Bit file is in top of FLASH, we only ues the bottom 4Mb */ - -#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ -#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ - -#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ -#define CFG_FLASH_LOCK_TOUT 5 /* Timeout for Flash Set Lock Bit (in ms) */ -#define CFG_FLASH_UNLOCK_TOUT 10000 /* Timeout for Flash Clear Lock Bits (in ms) */ -#define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -/*** CFI CONFIG ***/ -#define CFG_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CONFIG_FLASH_CFI_DRIVER -#define CFG_FLASH_CFI -/* Bypass cache when reading regs from flash memory */ -#define CFG_FLASH_CFI_BYPASS_READ -/* Buffered writes (32byte/go) instead of single accesses */ -#define CFG_FLASH_USE_BUFFER_WRITE - -/* - * Environment settings - */ -/*#define CFG_ENV_IS_NOWHERE 1*/ -#define CFG_ENV_IS_IN_FLASH 1 -/* CFG_ENV_ADDR need to be at sector boundary */ -#define CFG_ENV_SIZE 0x8000 -#define CFG_ENV_SECT_SIZE 0x20000 -#define CFG_ENV_ADDR (CFG_FLASH_BASE+CFG_FLASH_SIZE-CFG_ENV_SECT_SIZE) -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CFG_SDRAM_BASE 0x40000000 -#define CFG_SDRAM_SIZE 0x02000000 -#define CFG_SDRAM_END (CFG_SDRAM_BASE+CFG_SDRAM_SIZE) - -/* no SRAM available */ -#undef CFG_SRAM_BASE -#undef CFG_SRAM_SIZE - -#define CFG_RAM_BASE CFG_SDRAM_BASE -#define CFG_RAM_SIZE CFG_SDRAM_SIZE -#define CFG_RAM_END CFG_SDRAM_END - -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ -#define CFG_GBL_DATA_OFFSET (CFG_SDRAM_END - CFG_GBL_DATA_SIZE) - -#define CFG_PROM_SIZE (8192-CFG_GBL_DATA_SIZE) -#define CFG_PROM_OFFSET (CFG_GBL_DATA_OFFSET-CFG_PROM_SIZE) - -#define CFG_INIT_SP_OFFSET (CFG_PROM_OFFSET-32) -#define CFG_STACK_SIZE (0x10000-32) - -#define CFG_MONITOR_BASE TEXT_BASE -#if (CFG_MONITOR_BASE < CFG_FLASH_BASE) -# define CFG_RAMBOOT 1 -#endif - -#define CFG_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ -#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#define CFG_MALLOC_END (CFG_INIT_SP_OFFSET-CFG_STACK_SIZE) -#define CFG_MALLOC_BASE (CFG_MALLOC_END-CFG_MALLOC_LEN) - -/* relocated monitor area */ -#define CFG_RELOC_MONITOR_MAX_END CFG_MALLOC_BASE -#define CFG_RELOC_MONITOR_BASE (CFG_RELOC_MONITOR_MAX_END-CFG_MONITOR_LEN) - -/* make un relocated address from relocated address */ -#define UN_RELOC(address) (address-(CFG_RELOC_MONITOR_BASE-TEXT_BASE)) - -/* - * Ethernet configuration uses on board SMC91C111, however if a mezzanine - * with a PHY is attached the GRETH can be used on this board. - * Define USE_GRETH in order to use the mezzanine provided PHY with the - * onchip GRETH network MAC, note that this is not supported by the - * template design. - */ -#ifndef USE_GRETH - -/* USE SMC91C111 MAC */ -#define CONFIG_DRIVER_SMC91111 1 -#define CONFIG_SMC91111_BASE 0x20000300 /* chip select 3 */ -#define CONFIG_SMC_USE_32_BIT 1 /* 32 bit bus */ -#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */ -/*#define CONFIG_SHOW_ACTIVITY*/ -#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */ - -#else - -/* USE GRETH Ethernet Driver */ -#define CONFIG_NET_MULTI 1 -#define CONFIG_GRETH 1 - -/* Default GRETH Ethernet HARDWARE address */ -#define GRETH_HWADDR_0 0x00 -#define GRETH_HWADDR_1 0x00 -#define GRETH_HWADDR_2 0x7a -#define GRETH_HWADDR_3 0xcc -#define GRETH_HWADDR_4 0x00 -#define GRETH_HWADDR_5 0x13 -#endif - -#define CONFIG_ETHADDR 00:00:7a:cc:00:13 -#define CONFIG_PHY_ADDR 0x00 - -/* - * Miscellaneous configurable options - */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "=> " /* Monitor Command Prompt */ -#if defined(CONFIG_CMD_KGDB) -#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0x00100000 /* memtest works on */ -#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CFG_LOAD_ADDR 0x100000 /* default load address */ - -#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00005000 - -/***** Gaisler GRLIB IP-Cores Config ********/ - -/* AMBA Plug & Play info display on startup */ -/*#define CFG_AMBAPP_PRINT_ON_STARTUP*/ - -#define CFG_GRLIB_SDRAM 0 - -/* See, GRLIB Docs (grip.pdf) on how to set up - * These the memory controller registers. - */ -#define CFG_GRLIB_MEMCFG1 (0x10f800ff | (1<<11)) -#define CFG_GRLIB_MEMCFG2 0x00000000 -#define CFG_GRLIB_MEMCFG3 0x00000000 - -#define CFG_GRLIB_FT_MEMCFG1 (0x10f800ff | (1<<11)) -#define CFG_GRLIB_FT_MEMCFG2 0x00000000 -#define CFG_GRLIB_FT_MEMCFG3 0x00000000 - -#define CFG_GRLIB_DDR_CFG 0xa900830a - -#define CFG_GRLIB_DDR2_CFG1 0x00000000 -#define CFG_GRLIB_DDR2_CFG3 0x00000000 - -/* Calculate scaler register value from default baudrate */ -#define CFG_GRLIB_APBUART_SCALER \ - ((((CONFIG_SYS_CLK_FREQ*10)/(CONFIG_BAUDRATE*8))-5)/10) - -/* Identification string */ -#define CONFIG_IDENT_STRING "GAISLER LEON3 EP2S60" - -/* default kernel command line */ -#define CONFIG_DEFAULT_KERNEL_COMMAND_LINE "console=ttyS0,38400\0\0" - -#endif /* __CONFIG_H */