X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgplugd.h;h=f2260eae56436530930bf54a2dc59f93b60c0cb4;hb=64d6ac5bc4a9bf8839e516959b35150ac8a0eb84;hp=0ac198df8d600d637a750fb3710524a19777cfc3;hpb=b79dadf846e5e140e261bbfa4decd024357702d7;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/gplugd.h b/include/configs/gplugd.h
index 0ac198d..f2260ea 100644
--- a/include/configs/gplugd.h
+++ b/include/configs/gplugd.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2011
  * eInfochips Ltd. <www.einfochips.com>
- * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
+ * Written-by: Ajay Bhargav <contact@8051projects.net>
  *
  * Based on Aspenite:
  * (C) Copyright 2010
@@ -16,32 +16,12 @@
 #define __CONFIG_GPLUGD_H
 
 /*
- * FIXME: fix for error caused due to recent update to mach-types.h
- */
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_SHEEVAD
-#error "MACH_TYPE_SHEEVAD has been defined properly, please remove this."
-#else
-#define MACH_TYPE_SHEEVAD	2625
-#endif
-
-/*
- * Generic board support
- */
-#define CONFIG_SYS_GENERIC_BOARD
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING	"\nMarvell-gplugD"
-
-/*
  * High Level Configuration Options
  */
 #define CONFIG_SHEEVA_88SV331xV5	1	/* CPU Core subversion */
 #define CONFIG_ARMADA100		1	/* SOC Family Name */
 #define CONFIG_ARMADA168		1	/* SOC Used on this Board */
-#define CONFIG_MACH_TYPE		MACH_TYPE_SHEEVAD /* Machine type */
+#define CONFIG_MACH_TYPE		MACH_TYPE_GPLUGD /* Machine type */
 #define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
 
 #define	CONFIG_SYS_TEXT_BASE	0x00f00000
@@ -56,24 +36,15 @@
 /*
  * Commands configuration
  */
-#define CONFIG_SYS_NO_FLASH		/* Declare no flash (NOR/SPI) */
-#include <config_cmd_default.h>
-#define CONFIG_CMD_I2C
-#undef CONFIG_CMD_FPGA
-#define CONFIG_CMD_USB
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 
 /* Disable DCACHE */
 #define CONFIG_SYS_DCACHE_OFF
 
 /* Network configuration */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_CMD_PING
 #define CONFIG_ARMADA100_FEC
 
 /* DHCP Support */
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_DHCP_REQUEST_DELAY		50000
 #endif /* CONFIG_CMD_NET */
 
@@ -82,7 +53,6 @@
 
 /* PHY configuration */
 #define CONFIG_MII
-#define CONFIG_CMD_MII
 #define CONFIG_RESET_PHY_R
 /* 88E3015 register definition */
 #define PHY_LED_PAR_SEL_REG		22
@@ -91,21 +61,13 @@
 /* GPIO Configuration for PHY */
 #define CONFIG_SYS_GPIO_PHY_RST		104	/* GPIO104 */
 
-/* SPI Support */
-#define CONFIG_ARMADA100_SPI
-#define CONFIG_ENV_SPI_CS		110
-#define CONFIG_SYS_SSP_PORT		2
-
 /* Flash Support */
-#define CONFIG_CMD_SF
-#define CONFIG_SPI_FLASH_ATMEL
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
  * to enable certain macros
  */
 #include "mv-common.h"
-#undef CONFIG_ARCH_MISC_INIT
 
 #ifdef CONFIG_SYS_NS16550_COM1
 #undef CONFIG_SYS_NS16550_COM1
@@ -116,24 +78,14 @@
 /*
  * Environment variables configurations
  */
-#define CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE		0x4000
+#define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE			0x4000
-#define CONFIG_ENV_OFFSET		0x07C000
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_EDITENV
-#define CONFIG_CMD_SAVEENV
 
 #ifdef CONFIG_CMD_USB
-#define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_ARMADA100
 #define CONFIG_EHCI_IS_TDI
-#define CONFIG_USB_STORAGE
 #endif /* CONFIG_CMD_USB */
 
-#define CONFIG_DOS_PARTITION
-#define CONFIG_ISO_PARTITION
 #define CONFIG_SUPPORT_VFAT
 
 #endif	/* __CONFIG_GPLUGD_H */