X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgoflexhome.h;h=832441a7b72155ed85b46e9b028e9310c93a5e64;hb=0154e6de37e8bbaac837939391f6d4a8f0b3fd18;hp=f9bced3f8f24b5934bc2c4e6748523dca6caf2d5;hpb=c9032ce168c1344fe8ffe8604825ec343ec14adf;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
index f9bced3..832441a 100644
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@@ -1,4 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
+ * Copyright (C) 2022 Tony Dinh <mibodhi@gmai.com>
  * Copyright (C) 2013 Suriyan Ramasami <suriyan.r@gmail.com>
  *
  * Based on dockstar.h originally written by
@@ -8,109 +10,41 @@
  * Prafulla Wadaskar <prafulla@marvell.com>
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_GOFLEXHOME_H
 #define _CONFIG_GOFLEXHOME_H
 
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
-#define CONFIG_KW88F6281	1	/* SOC Name */
-#define CONFIG_MACH_GOFLEXHOME		/* Machine type */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
+#include <linux/bitops.h>
 
 /*
  * Default GPIO configuration and LED status
  */
 #define GOFLEXHOME_OE_LOW               (~(0))
 #define GOFLEXHOME_OE_HIGH              (~(0))
-#define GOFLEXHOME_OE_VAL_LOW           (1 << 29)       /* USB_PWEN low */
-#define GOFLEXHOME_OE_VAL_HIGH          (1 << 17)       /* LED pin high */
-
-/* PHY related */
-#define MV88E1116_LED_FCTRL_REG         10
-#define MV88E1116_CPRSP_CR3_REG         21
-#define MV88E1116_MAC_CTRL_REG          21
-#define MV88E1116_PGADR_REG             22
-#define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
-#define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
-
-/*
- * Commands configuration
- */
-
-#define CONFIG_CMD_ENV
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_IDE
-#define CONFIG_SYS_MVFS         /* Picks up Filesystem from mv-common.h */
+#define GOFLEXHOME_OE_VAL_LOW		BIT(29)		/* USB_PWEN low */
+#define GOFLEXHOME_OE_VAL_HIGH          BIT(17)		/* LED pin high */
 
-/*
- * mv-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-common.h"
 
 /*
- *  Environment variables configurations
- */
-#ifdef CONFIG_CMD_NAND
-#define CONFIG_ENV_IS_IN_NAND		1
-#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128K */
-#else
-#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
-#endif
-/*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
-#define CONFIG_ENV_SIZE			0x20000	/* 128k */
-#define CONFIG_ENV_ADDR			0xC0000
-#define CONFIG_ENV_OFFSET		0xC0000	/* env starts here */
-
-/*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND \
-	"setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
-	"ubi part root; " \
-	"ubifsmount ubi:root; " \
-	"ubifsload 0x800000 ${kernel}; " \
-	"bootm 0x800000"
-
-#define CONFIG_MTDPARTS \
-	"mtdparts=orion_nand:1m(uboot),6M(uImage),-(root)\0"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"console=console=ttyS0,115200\0" \
 	"mtdids=nand0=orion_nand\0" \
-	"mtdparts="CONFIG_MTDPARTS \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT \
 	"kernel=/boot/uImage\0" \
 	"bootargs_root=ubi.mtd=root root=ubi0:root rootfstype=ubifs ro\0"
 
 /*
  * Ethernet Driver configuration
  */
-#ifdef CONFIG_CMD_NET
 #define CONFIG_MVGBE_PORTS	{1, 0}	/* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR	0
-#endif /* CONFIG_CMD_NET */
-
-/*
- *  * SATA Driver configuration
- *   */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
 
-/*
- *  * RTC driver configuration
- *   */
-#ifdef CONFIG_CMD_DATE
-#define CONFIG_RTC_MV
-#endif /* CONFIG_CMD_DATE */
+/* SATA driver configuration */
+#define CONFIG_LBA48
 
 #endif /* _CONFIG_GOFLEXHOME_H */