X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fge_bx50v3.h;h=0eeffd46377bfa8548a3b4da326ebe04dba9a28c;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=a959488cb9bd6d011faafb8cbc03b2d5dccf18b6;hpb=6e7d7aa2e2062995c1cbc3af81cf40c04c50ad30;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ge_bx50v3.h b/include/configs/ge_bx50v3.h
index a959488..0eeffd4 100644
--- a/include/configs/ge_bx50v3.h
+++ b/include/configs/ge_bx50v3.h
@@ -19,12 +19,6 @@
 #include "mx6_common.h"
 #include <linux/sizes.h>
 
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_REVISION_TAG
-#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
-
 /* SATA Configs */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
@@ -33,25 +27,7 @@
 #define CONFIG_LBA48
 #endif
 
-/* USB Configs */
-#ifdef CONFIG_USB
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
-#define CONFIG_MXC_USB_FLAGS	0
-
-#define CONFIG_USBD_HS
-#define CONFIG_USB_GADGET_MASS_STORAGE
-#endif
-
-/* Serial Flash */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_LOADADDR	0x12000000
-
-#ifdef CONFIG_NFS_CMD
+#ifdef CONFIG_CMD_NFS
 #define NETWORKBOOT \
         "setnetworkboot=" \
                 "setenv ipaddr 172.16.2.10; setenv serverip 172.16.2.20; " \
@@ -59,15 +35,15 @@
                 "setenv netmask 255.255.255.0; setenv ethaddr ca:fe:de:ca:f0:11; " \
                 "setenv bootargs root=/dev/nfs nfsroot=${nfsserver}:/srv/nfs/,v3,tcp rw rootwait" \
                 "setenv bootargs $bootargs ip=${ipaddr}:${nfsserver}:${gatewayip}:${netmask}::eth0:off " \
-                "setenv bootargs $bootargs cma=128M bootcause=POR ${videoargs} " \
+                "setenv bootargs $bootargs cma=128M bootcause=${bootcause} ${videoargs} " \
                 "setenv bootargs $bootargs systemd.mask=helix-network-defaults.service " \
                 "setenv bootargs $bootargs watchdog.handle_boot_enabled=1\0" \
         "networkboot=" \
                 "run setnetworkboot; " \
                 "nfs ${loadaddr} /srv/nfs/fitImage; " \
-                "bootm ${loadaddr}#conf@${confidx}\0" \
+                "bootm ${loadaddr}\0" \
 
-#define CONFIG_NETWORKBOOTCOMMAND \
+#define NETWORKBOOTCOMMAND \
 	"run networkboot; " \
 
 #else
@@ -77,7 +53,6 @@
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	NETWORKBOOT \
-	"bootcause=POR\0" \
 	"image=/boot/fitImage\0" \
 	"dev=mmc\0" \
 	"devnum=2\0" \
@@ -96,18 +71,17 @@
 	"swappartitions=" \
 		"setexpr partnum 3 - ${partnum}\0" \
 	"failbootcmd=" \
-		"echo reached failbootcmd; " \
 		"cls; " \
 		"setcurs 5 4; " \
 		"lcdputs \"Monitor failed to start. " \
 		"Try again, or contact GE Service for support.\"; " \
-		"bootcount reset; \0" \
+		"bootcount reset; " \
+		"while true; do sleep 1; done; \0" \
 	"altbootcmd=" \
 		"run doquiet; " \
 		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 		"run hasfirstboot || setenv partnum 0; " \
 		"if test ${partnum} != 0; then " \
-			"setenv bootcause REVERT; " \
 			"run swappartitions loadimage doboot; " \
 		"fi; " \
 		"run failbootcmd\0" \
@@ -116,36 +90,24 @@
 	"doboot=" \
 		"echo Booting from ${dev}:${devnum}:${partnum} ...; " \
 		"run setargs; " \
-		"bootm ${loadaddr}#conf@${confidx}\0" \
+		"bootm ${loadaddr}\0" \
 	"tryboot=" \
 		"setenv partnum 1; run hasfirstboot || setenv partnum 2; " \
 		"run loadimage || run swappartitions && run loadimage || " \
-		"setenv partnum 0 && echo MISSING IMAGE;" \
+			"setenv partnum 0 && echo MISSING IMAGE;" \
 		"run doboot; " \
 		"run failbootcmd\0" \
 
-#define CONFIG_MMCBOOTCOMMAND \
-	"if mmc dev ${devnum}; then " \
-		"run doquiet; " \
-		"run tryboot; " \
-	"fi; " \
-
-#define CONFIG_USBBOOTCOMMAND \
-	"echo Unsupported; " \
+#define MMCBOOTCOMMAND \
+	"run doquiet; " \
+	"run tryboot; " \
 
-#ifdef CONFIG_NFS_CMD
-#define CONFIG_BOOTCOMMAND CONFIG_NETWORKBOOTCOMMAND
-#elif CONFIG_CMD_USB
-#define CONFIG_BOOTCOMMAND CONFIG_USBBOOTCOMMAND
+#ifdef CONFIG_CMD_NFS
+#define CONFIG_BOOTCOMMAND NETWORKBOOTCOMMAND
 #else
-#define CONFIG_BOOTCOMMAND CONFIG_MMCBOOTCOMMAND
+#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND
 #endif
 
-
-/* Miscellaneous configurable options */
-
-#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
@@ -173,7 +135,6 @@
 
 #define CONFIG_PCI_SCAN_SHOW
 #define CONFIG_PCIE_IMX
-#define CONFIG_PCIE_IMX_PERST_GPIO	IMX_GPIO_NR(7, 12)
 #define CONFIG_PCIE_IMX_POWER_GPIO	IMX_GPIO_NR(1, 5)
 
 #endif	/* __GE_BX50V3_CONFIG_H */