X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fgalaxy5200.h;h=e43cc284f22af07290274cc07ee032076a3c38d5;hb=219f4788d33b04e394d4ade1feaedc0292acc790;hp=931acfbc77e3b28039770943cdbee17a898e7adb;hpb=62506ae1401c69f208b6aed1111ac57d820c06a0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/galaxy5200.h b/include/configs/galaxy5200.h
index 931acfb..e43cc28 100644
--- a/include/configs/galaxy5200.h
+++ b/include/configs/galaxy5200.h
@@ -42,8 +42,20 @@
 #define CONFIG_MPC5xxx		1	/* This is an MPC5xxx CPU */
 #define CONFIG_MPC5200		1	/* (more precisely an MPC5200 CPU) */
 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333	/* ... running at 33.333333MHz */
-#define BOOTFLAG_COLD		0x01	/* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM		0x02	/* Software reboot */
+
+/*
+ * Valid values for CONFIG_SYS_TEXT_BASE are:
+ * 0xFFF00000	boot high (standard configuration)
+ * 0xFE000000	boot low
+ * 0x00100000	boot from RAM (for testing only) does not work
+ */
+#ifdef CONFIG_galaxy5200_LOWBOOT
+#define	CONFIG_SYS_TEXT_BASE	0xFE000000
+#endif
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xFFF00000	/* Standard: boot high */
+#endif
 
 /*
  * Serial console configuration
@@ -76,7 +88,7 @@
 
 #define	CONFIG_TIMESTAMP	1	/* Print image info with timestamp */
 
-#if (TEXT_BASE == 0xFE000000)		/* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)		/* Boot low */
 #define CONFIG_SYS_LOWBOOT 1
 #endif
 /* RAMBOOT will be defined automatically in memory section */
@@ -88,15 +100,21 @@
 /*
  * Autobooting
  */
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */
 #define CONFIG_ZERO_BOOTDELAY_CHECK	/* allow stopping of boot process */
 					/* even with bootdelay=0 */
-#undef	CONFIG_BOOTARGS
+#define CONFIG_BOOT_RETRY_TIME 120	/* Reset if no command is entered  */
+#define CONFIG_RESET_TO_RETRY
 
 #define CONFIG_PREBOOT	"echo;"	\
 	"echo Welcome to U-Boot;"\
 	"echo"
 
+#define CONFIG_BOOTCOMMAND     "go ff300004 0; go ff300004 2 2;" \
+	"bootm ff040000 ff900000 fffc0000"
+#define CONFIG_BOOTARGS        "console=ttyPSC0,115200"
+#define CONFIG_EXTRA_ENV_SETTINGS "epson=yes\0"
+
 /*
  * IPB Bus clocking configuration.
  */
@@ -135,7 +153,7 @@
 
 #define CONFIG_SYS_FLASH_BASE		0xfe000000
 /*
- * The flash size is autoconfigured, but cpu/mpc5xxx/cpu_init.c needs this
+ * The flash size is autoconfigured, but arch/powerpc/cpu/mpc5xxx/cpu_init.c needs this
  * variable defined
  */
 #define CONFIG_SYS_FLASH_SIZE		0x02000000
@@ -189,16 +207,13 @@
 #define CONFIG_SYS_INIT_RAM_ADDR	MPC5XXX_SRAM
 
 /* End of used area in SPRAM */
-#define CONFIG_SYS_INIT_RAM_END		MPC5XXX_SRAM_SIZE
-
-/* Size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_SIZE	128
+#define CONFIG_SYS_INIT_RAM_SIZE		MPC5XXX_SRAM_SIZE
 
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - \
-						CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+						GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
-#define CONFIG_SYS_MONITOR_BASE	TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 #	define CONFIG_SYS_RAMBOOT		1
 #endif
@@ -358,7 +373,6 @@
 #define CONFIG_DISPLAY_BOARDINFO 1
 
 #define CONFIG_SYS_HUSH_PARSER 1
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
 
 #define CONFIG_CRC32_VERIFY  1