X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fflea3.h;h=fded5a11dac71b21a40b47820f8eec89c9ad1769;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=df8169e410b57c72c6009850bd08be8989afa692;hpb=0a9ef45158d586017839d4b6fccd7f8f16672156;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index df8169e..fded5a1 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
  *
@@ -6,8 +7,6 @@
  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
  *
  * Configuration for the flea3 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -18,12 +17,9 @@
  /* High Level Configuration Options */
 #define CONFIG_MX35
 
-#define CONFIG_SYS_DCACHE_OFF
-
 #define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
 
 /* Set TEXT at the beginning of the NOR flash */
-#define CONFIG_SYS_TEXT_BASE	0xA0000000
 
 /* This is required to setup the ESDC controller */
 
@@ -47,8 +43,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
 #define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
 
 /*
  * UART (console)
@@ -58,14 +52,10 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
 
 /*
  * Command definition
  */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
 
 #define CONFIG_NET_RETRY_COUNT	100
 
@@ -79,17 +69,12 @@
 #define IMX_FEC_BASE	FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR	0x1
 
-#define CONFIG_MII
-
 #define CONFIG_ARP_TIMEOUT	200UL
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
@@ -102,7 +87,6 @@
 /*
  * Physical Memory Map
  */
-#define CONFIG_NR_DRAM_BANKS	1
 #define PHYS_SDRAM_1		CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE	(128 * 1024 * 1024)
 
@@ -117,17 +101,6 @@
 /*
  * MTD Command for mtdparts
  */
-#define CONFIG_MTD_DEVICE
-#define CONFIG_FLASH_CFI_MTD
-#define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT		"nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT	"mtdparts=mxc_nand:50m(root1)," \
-				"32m(rootfb)," \
-				"64m(pcache)," \
-				"64m(app1)," \
-				"10m(app2),-(spool);" \
-				"physmap-flash.0:512k(u-boot),64k(env1)," \
-				"64k(env2),3776k(kernel1),3776k(kernel2)"
 
 /*
  * FLASH and environment organization
@@ -139,25 +112,13 @@
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
 
-#define CONFIG_ENV_SECT_SIZE	(64 * 1024)
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
-
 /* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
-#define CONFIG_ENV_SIZE_REDUND	CONFIG_ENV_SIZE
-
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE + \
-				CONFIG_SYS_MONITOR_LEN)
 
 /*
  * CFI FLASH driver setup
  */
-#define CONFIG_SYS_FLASH_CFI		/* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER
 
 /* A non-standard buffered write algorithm */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* faster */
-#define CONFIG_SYS_FLASH_PROTECTION	/* Use hardware sector protection */
 
 /*
  * NAND FLASH driver setup
@@ -173,7 +134,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME flea3
+#define CONFIG_HOSTNAME "flea3"
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
@@ -191,9 +152,9 @@
 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
 	"loadaddr=80800000\0"						\
 	"kernel_addr_r=80800000\0"					\
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
-	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
+	"hostname=" CONFIG_HOSTNAME "\0"			\
+	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
+	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
 	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
@@ -207,7 +168,7 @@
 		"run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
 		"else echo Images not loades;fi\0"			\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
 	"update=protect off ${uboot_addr} +80000;"			\