X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fflea3.h;h=cda5f4d6eb01b29d2fc469175f3c09e1cf742fe0;hb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;hp=35606110816b393c8f93c9df801b9b8de5ae7a9f;hpb=a0e80c97c9ba1409c2370f6c8b2a4d6a48cdb15c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index 3560611..cda5f4d 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011, Stefano Babic <sbabic@denx.de>
  *
@@ -6,8 +7,6 @@
  * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
  *
  * Configuration for the flea3 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -23,7 +22,6 @@
 #define CONFIG_MACH_TYPE		MACH_TYPE_FLEA3
 
 /* Set TEXT at the beginning of the NOR flash */
-#define CONFIG_SYS_TEXT_BASE	0xA0000000
 
 /* This is required to setup the ESDC controller */
 
@@ -47,8 +45,6 @@
 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
 #define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
-#define CONFIG_MXC_SPI
-#define CONFIG_MXC_GPIO
 
 /*
  * UART (console)
@@ -58,14 +54,10 @@
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
 
 /*
  * Command definition
  */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_DNS
 
 #define CONFIG_NET_RETRY_COUNT	100
 
@@ -86,10 +78,7 @@
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_CMDLINE_EDITING
 
-#define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
 #define CONFIG_SYS_MAXARGS	32	/* max number of command args */
@@ -120,14 +109,6 @@
 #define CONFIG_MTD_DEVICE
 #define CONFIG_FLASH_CFI_MTD
 #define CONFIG_MTD_PARTITIONS
-#define MTDIDS_DEFAULT		"nand0=mxc_nand,nor0=physmap-flash.0"
-#define MTDPARTS_DEFAULT	"mtdparts=mxc_nand:50m(root1)," \
-				"32m(rootfb)," \
-				"64m(pcache)," \
-				"64m(app1)," \
-				"10m(app2),-(spool);" \
-				"physmap-flash.0:512k(u-boot),64k(env1)," \
-				"64k(env2),3776k(kernel1),3776k(kernel2)"
 
 /*
  * FLASH and environment organization
@@ -162,7 +143,6 @@
 /*
  * NAND FLASH driver setup
  */
-#define CONFIG_NAND_MXC
 #define CONFIG_MXC_NAND_REGS_BASE	(NFC_BASE_ADDR)
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		(NFC_BASE_ADDR)
@@ -174,7 +154,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME flea3
+#define CONFIG_HOSTNAME "flea3"
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
 	"netdev=eth0\0"							\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
@@ -192,9 +172,9 @@
 	"addmisc=setenv bootargs ${bootargs} ${misc}\0"			\
 	"loadaddr=80800000\0"						\
 	"kernel_addr_r=80800000\0"					\
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
-	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/uRamdisk\0"	\
+	"hostname=" CONFIG_HOSTNAME "\0"			\
+	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
+	"ramdisk_file=" CONFIG_HOSTNAME "/uRamdisk\0"	\
 	"flash_self=run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc;"		\
@@ -208,7 +188,7 @@
 		"run ramargs addip addtty addmtd addmisc;"		\
 		"bootm ${kernel_addr_r} ${ramdisk_addr_r};"		\
 		"else echo Images not loades;fi\0"			\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
 	"update=protect off ${uboot_addr} +80000;"			\