X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fflea3.h;h=96a2a80aca4bd6d80e27aef933dcef9e60ab728f;hb=a5d67547dd9c7a527dfda1967010e703a22441ff;hp=bf02829cde58f856efcf01647989fe3cdc9f603f;hpb=dee332ffb735f65ab922118791a583c17bb0b795;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index bf02829..96a2a80 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -19,9 +19,6 @@
 #define CONFIG_MX35
 
 #define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_CACHELINE_SIZE	32
-
-#define CONFIG_DISPLAY_CPUINFO
 
 /* Only in case the value is not present in mach-types.h */
 #ifndef MACH_TYPE_FLEA3
@@ -34,7 +31,6 @@
 #define CONFIG_SYS_TEXT_BASE	0xA0000000
 
 /* This is required to setup the ESDC controller */
-#define CONFIG_BOARD_EARLY_INIT_F
 
 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 #define CONFIG_REVISION_TAG
@@ -51,6 +47,9 @@
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
+#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
 #define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
 #define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
 #define CONFIG_MXC_SPI
@@ -70,29 +69,17 @@
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_DNS
 
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_CACHE
 
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_SPI
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_NET_RETRY_COUNT	100
 
-#define CONFIG_BOOTDELAY	3
 
 #define CONFIG_LOADADDR		0x80800000	/* loadaddr env var */
 
-
 /*
  * Ethernet on SOC (FEC)
  */
@@ -110,22 +97,17 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"flea3 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
-#define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
 
 #define CONFIG_AUTO_COMPLETE
-#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	512	/* Console I/O Buffer Size */
 /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
 /*
@@ -243,8 +225,8 @@
 	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
 	"load=tftp ${loadaddr} ${u-boot}\0"				\
 	"uboot_addr=" __stringify(CONFIG_SYS_MONITOR_BASE) "\0"		\
-	"update=protect off ${uboot_addr} +40000;"			\
-		"erase ${uboot_addr} +40000;"				\
+	"update=protect off ${uboot_addr} +80000;"			\
+		"erase ${uboot_addr} +80000;"				\
 		"cp.b ${loadaddr} ${uboot_addr} ${filesize}\0"		\
 	"upd=if run load;then echo Updating u-boot;if run update;"	\
 		"then echo U-Boot updated;"				\