X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fflea3.h;h=5b4b0119573f3b80a767ab554242bc388aba612b;hb=181bd9dc61d2da88b78f1c1138a685dae39354d6;hp=cfcaf1b232f113184f65f37629d3a528c86b370f;hpb=aaf5e825606a70ddc8fca8e366d8c16a6fd3cc7c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/flea3.h b/include/configs/flea3.h
index cfcaf1b..5b4b011 100644
--- a/include/configs/flea3.h
+++ b/include/configs/flea3.h
@@ -7,7 +7,7 @@
  *
  * Configuration for the flea3 board.
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -16,13 +16,13 @@
 #include <asm/arch/imx-regs.h>
 
  /* High Level Configuration Options */
-#define CONFIG_ARM1136	/* This is an arm1136 CPU core */
 #define CONFIG_MX35
 
 #define CONFIG_SYS_DCACHE_OFF
 #define CONFIG_SYS_CACHELINE_SIZE	32
 
 #define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_SYS_GENERIC_BOARD
 
 /* Only in case the value is not present in mach-types.h */
 #ifndef MACH_TYPE_FLEA3
@@ -50,11 +50,11 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_HARD_I2C
-#define CONFIG_I2C_MXC
-#define CONFIG_SYS_I2C_BASE		I2C3_BASE_ADDR
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		0xfe
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MXC
+#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
+#define CONFIG_SYS_SPD_BUS_NUM		2 /* I2C3 */
+#define CONFIG_SYS_MXC_I2C3_SLAVE	0xfe
 #define CONFIG_MXC_SPI
 #define CONFIG_MXC_GPIO
 
@@ -72,9 +72,6 @@
 /*
  * Command definition
  */
-
-#include <config_cmd_default.h>
-
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_BOOTP_SUBNETMASK
@@ -87,7 +84,6 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_MII
-#define CONFIG_CMD_NET
 #define CONFIG_NET_RETRY_COUNT	100
 
 #define CONFIG_BOOTDELAY	3
@@ -112,7 +108,6 @@
  * Miscellaneous configurable options
  */
 #define CONFIG_SYS_LONGHELP	/* undef to save memory */
-#define CONFIG_SYS_PROMPT	"flea3 U-Boot > "
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER	/* Use the HUSH parser */
 
@@ -126,12 +121,8 @@
 #define CONFIG_SYS_MEMTEST_START	0	/* memtest works on */
 #define CONFIG_SYS_MEMTEST_END		0x10000
 
-#undef	CONFIG_SYS_CLKS_IN_HZ	/* everything, incl board info, in Hz */
-
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
-#define CONFIG_SYS_HZ				1000
-
 /*
  * Physical Memory Map
  */