X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fexynos5250-dt.h;h=582c584ae69625352fdde8a1dd2aa2e88bcebc01;hb=fbbbc86e8ebac4f42f4ca39ceba80cea27c983bc;hp=41d6cf9d15f7fd50ad3f087244bea6f6d23f57e8;hpb=1318d00e5894ac55bc6b7297f3eda97983b79fae;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/exynos5250-dt.h b/include/configs/exynos5250-dt.h
index 41d6cf9..582c584 100644
--- a/include/configs/exynos5250-dt.h
+++ b/include/configs/exynos5250-dt.h
@@ -43,6 +43,14 @@
 #define CONFIG_OF_CONTROL
 #define CONFIG_OF_SEPARATE
 
+/* Allow tracing to be enabled */
+#define CONFIG_TRACE
+#define CONFIG_CMD_TRACE
+#define CONFIG_TRACE_BUFFER_SIZE	(16 << 20)
+#define CONFIG_TRACE_EARLY_SIZE		(8 << 20)
+#define CONFIG_TRACE_EARLY
+#define CONFIG_TRACE_EARLY_ADDR		0x50000000
+
 /* Keep L2 Cache Disabled */
 #define CONFIG_SYS_DCACHE_OFF
 
@@ -78,30 +86,41 @@
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (4 << 20))
 
 /* select serial console configuration */
-#define CONFIG_SERIAL3			/* use SERIAL 3 */
 #define CONFIG_BAUDRATE			115200
 #define EXYNOS5_DEFAULT_UART_OFFSET	0x010000
+#define CONFIG_SILENT_CONSOLE
+
+/* Enable keyboard */
+#define CONFIG_CROS_EC		/* CROS_EC protocol */
+#define CONFIG_CROS_EC_SPI		/* Support CROS_EC over SPI */
+#define CONFIG_CROS_EC_I2C		/* Support CROS_EC over I2C */
+#define CONFIG_CROS_EC_KEYB	/* CROS_EC keyboard input */
+#define CONFIG_CMD_CROS_EC
+#define CONFIG_KEYBOARD
 
 /* Console configuration */
 #define CONFIG_CONSOLE_MUX
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define EXYNOS_DEVICE_SETTINGS \
-		"stdin=serial\0" \
+		"stdin=serial,cros-ec-keyb\0" \
 		"stdout=serial,lcd\0" \
 		"stderr=serial,lcd\0"
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	EXYNOS_DEVICE_SETTINGS
 
-#define TZPC_BASE_OFFSET		0x10000
-
 /* SD/MMC configuration */
 #define CONFIG_GENERIC_MMC
 #define CONFIG_MMC
 #define CONFIG_SDHCI
 #define CONFIG_S5P_SDHCI
+#define CONFIG_DWMMC
+#define CONFIG_EXYNOS_DWMMC
+#define CONFIG_SUPPORT_EMMC_BOOT
+
 
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* PWM */
 #define CONFIG_PWM
@@ -135,6 +154,7 @@
 #define CONFIG_USB_STORAGE
 
 /* USB boot mode */
+#define CONFIG_USB_BOOTING
 #define EXYNOS_COPY_USB_FNPTR_ADDR	0x02020070
 #define EXYNOS_USB_SECONDARY_BOOT	0xfeed0002
 #define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
@@ -150,8 +170,10 @@
 #define CONFIG_SPL
 #define COPY_BL2_FNPTR_ADDR	0x02020030
 
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+
 /* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT	"board/samsung/smdk5250/smdk5250-uboot-spl.lds"
+#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
 #define CONFIG_SPL_TEXT_BASE	0x02023400
 #define CONFIG_SPL_MAX_FOOTPRINT	(14 * 1024)
 
@@ -227,15 +249,19 @@
 #define BL2_START_OFFSET	(CONFIG_BL2_OFFSET/512)
 #define BL2_SIZE_BLOC_COUNT	(CONFIG_BL2_SIZE/512)
 
-#define OM_STAT				(0x1f << 1)
+#define CONFIG_SPI_BOOTING
 #define EXYNOS_COPY_SPI_FNPTR_ADDR	0x02020058
 #define SPI_FLASH_UBOOT_POS		(CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE)
 
 #define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_PART
+#define CONFIG_PARTITION_UUIDS
+
 
 #define CONFIG_IRAM_STACK	0x02050000
 
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR - 0x1000000)
+#define CONFIG_SYS_INIT_SP_ADDR	CONFIG_IRAM_STACK
 
 /* I2C */
 #define CONFIG_SYS_I2C_INIT_BOARD
@@ -262,6 +288,7 @@
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_SPI_FLASH_GIGADEVICE
 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
 #define CONFIG_SF_DEFAULT_SPEED		50000000
 #define EXYNOS5_SPI_NUM_CONTROLLERS	5