X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fexynos5-common.h;h=9297fbdc08176445baf2c00797edd7f3de0c7438;hb=12e396303c487c9f0fdf8d36d31a97cd2dada643;hp=6915dc1a48104948872fad904087383a22a155ed;hpb=be62fbf376261ab3a4ed5db3bf54d5df9e216d9f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/exynos5-common.h b/include/configs/exynos5-common.h
index 6915dc1..9297fbd 100644
--- a/include/configs/exynos5-common.h
+++ b/include/configs/exynos5-common.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2013 Samsung Electronics
  *
  * Configuration settings for the SAMSUNG EXYNOS5 board.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_EXYNOS5_COMMON_H
@@ -17,7 +16,6 @@
 
 #ifdef FTRACE
 #define CONFIG_TRACE
-#define CONFIG_CMD_TRACE
 #define CONFIG_TRACE_BUFFER_SIZE	(16 << 20)
 #define CONFIG_TRACE_EARLY_SIZE		(8 << 20)
 #define CONFIG_TRACE_EARLY
@@ -46,15 +44,11 @@
 
 /* MMC SPL */
 #define COPY_BL2_FNPTR_ADDR	0x02020030
-#define CONFIG_SUPPORT_EMMC_BOOT
 
 /* specific .lds file */
-#define CONFIG_SPL_LDSCRIPT	"board/samsung/common/exynos-uboot-spl.lds"
 
 /* Boot Argument Buffer Size */
 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)
 
 #define CONFIG_RD_LVL
@@ -78,8 +72,6 @@
 
 #define CONFIG_SYS_MONITOR_BASE	0x00000000
 
-#define CONFIG_SYS_MMC_ENV_DEV		0
-
 #define CONFIG_SECURE_BL1_ONLY
 
 /* Secure FW size configuration */
@@ -93,7 +85,6 @@
 #define CONFIG_RES_BLOCK_SIZE	(512)
 #define CONFIG_BL1_SIZE	(16 << 10) /*16 K reserved for BL1*/
 #define CONFIG_BL2_SIZE	(512UL << 10UL) /* 512 KB */
-#define CONFIG_ENV_SIZE	(16 << 10) /* 16 KB */
 
 #define CONFIG_BL1_OFFSET	(CONFIG_RES_BLOCK_SIZE + CONFIG_SEC_FW_SIZE)
 #define CONFIG_BL2_OFFSET	(CONFIG_BL1_OFFSET + CONFIG_BL1_SIZE)
@@ -111,39 +102,15 @@
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0x0
 
 /* SPI */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
-#define CONFIG_SF_DEFAULT_SPEED		50000000
-#endif
-
-#ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SPI_MODE	SPI_MODE_0
-#define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_BUS	1
-#define CONFIG_ENV_SPI_MAX_HZ	50000000
-#endif
 
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_SMC911X
-#define CONFIG_SMC911X_BASE		0x5000000
-#define CONFIG_SMC911X_16_BIT
 #define CONFIG_ENV_SROM_BANK		1
 #endif /*CONFIG_CMD_NET*/
 
-/* SHA hashing */
-#define CONFIG_HASH_VERIFY
-
 /* Enable Time Command */
 
 /* USB */
-#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS	3
-#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
-
-#define CONFIG_USB_HOST_ETHER
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_SMSC95XX
-#define CONFIG_USB_ETHER_RTL8152
 
 /* USB boot mode */
 #define CONFIG_USB_BOOTING
@@ -152,6 +119,7 @@
 #define EXYNOS_IRAM_SECONDARY_BASE	0x02020018
 
 #define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 2) \
 	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	func(PXE, pxe, na) \