X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fethernut5.h;h=8bec154f43c73c0c1c60c0b76036e7f8d7f22c63;hb=8f1a80e99e4a838d1540cdb1d59ccc7785fe4618;hp=4c69af6af3f30da2d60994a3559e95426b8e3468;hpb=d6694aff569a0838a9d0ef352128f5aa309d73ff;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 4c69af6..8bec154 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,8 +12,6 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* The first stage boot loader expects u-boot running at this address. */
 #define CONFIG_SYS_TEXT_BASE	0x27000000	/* 16MB available */
 
@@ -21,11 +19,9 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* Set our official architecture number. */
-#define MACH_TYPE_ETHERNUT5 1971
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_DISPLAY_CPUINFO		/* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
@@ -60,14 +56,11 @@
 /* 512kB DataFlash at NPCS0 */
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS	1
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
 #define DATAFLASH_TCSS			(0x1a << 16)
 #define DATAFLASH_TCHS			(0x1 << 24)
 
-#define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_OFFSET		0x3DE000
 #define CONFIG_ENV_SECT_SIZE		(132 << 10)
 #define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
@@ -78,65 +71,20 @@
 
 /* SPI */
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT	(5 * CONFIG_SYS_HZ)
 #define AT91_SPI_CLK			15000000
 
 /* Serial port */
 #define CONFIG_ATMEL_USART
 #define CONFIG_USART3			/* USART 3 is DBGU */
-#define CONFIG_BAUDRATE			115200
 #define CONFIG_USART_BASE		ATMEL_BASE_DBGU
 #define	CONFIG_USART_ID			ATMEL_ID_SYS
 
 /* Misc. hardware drivers */
 #define CONFIG_AT91_GPIO
 
-/* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_SPI
-
-#ifdef MINIMAL_LOADER
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_EDITENV
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-#else
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DNS
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RARP
+#ifndef MINIMAL_LOADER
 #define CONFIG_CMD_REISER
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_USB
 #endif
 
 /* NAND flash */
@@ -154,7 +102,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
@@ -168,8 +115,6 @@
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIO_PORTC, 8
 #endif
@@ -183,7 +128,6 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00500000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"host"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* RTC */
@@ -236,15 +180,8 @@
 #define MTDIDS_DEFAULT		"nand0=atmel_nand"
 #define MTDPARTS_DEFAULT	"mtdparts=atmel_nand:-(root)"
 #endif
-#if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
-	defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
-#define CONFIG_LZO
-#define CONFIG_RBTREE
 
 /* Boot command */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -257,8 +194,6 @@
 #endif
 
 /* Misc. u-boot settings */
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + 16 \