X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fethernut5.h;h=7a3c800dca9c1150bc35f666c3f7ca9515b212c2;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=ca249d9d2b50cc3cd0cbbfa8fbc998f009a8d202;hpb=4cb8a10f7e6f50a8c71e41df1207264266bfa305;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index ca249d9..7a3c800 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -14,10 +14,6 @@
 /* The first stage boot loader expects u-boot running at this address. */
 
 /* The first stage boot loader takes care of low level initialization. */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* Set our official architecture number. */
-#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
 
@@ -26,24 +22,15 @@
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000 /* 18.432 MHz crystal */
 
 /* 32kB internal SRAM */
-#define CONFIG_SRAM_BASE	0x00300000 /*AT91SAM9XE_SRAM_BASE */
-#define CONFIG_SRAM_SIZE	(32 << 10)
-#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \
-				GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_RAM_ADDR	0x00300000 /*AT91SAM9XE_SRAM_BASE */
+#define CONFIG_SYS_INIT_RAM_SIZE	(32 << 10)
 
 /* 128MB SDRAM in 1 bank */
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		(128 << 20)
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
 
 /* 512kB on-chip NOR flash */
-# define CONFIG_SYS_MAX_FLASH_BANKS	1
 # define CONFIG_SYS_FLASH_BASE		0x00200000 /* AT91SAM9XE_FLASH_BASE */
-# define CONFIG_AT91_EFLASH
-# define CONFIG_SYS_MAX_FLASH_SECT	32
-# define CONFIG_EFLASH_PROTSECTORS	1
 
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
@@ -61,34 +48,16 @@
 #endif
 
 /* JFFS2 */
-#ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_NAND
-#endif
 
 /* Ethernet */
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB
-#define CONFIG_RMII
 #define CONFIG_PHY_ID			0
 #define CONFIG_MACB_SEARCH_PHY
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIO_PORTC, 8
 #endif
 
-/* USB */
-#ifdef CONFIG_CMD_USB
-#define CONFIG_USB_ATMEL
-#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
-#define CONFIG_USB_OHCI_NEW
-#define CONFIG_SYS_USB_OHCI_CPU_INIT
-#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00500000
-#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"host"
-#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#endif
-
 /* RTC */
 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
 #define CONFIG_SYS_I2C_RTC_ADDR		0x51
@@ -97,11 +66,6 @@
 /* I2C */
 #define CONFIG_SYS_MAX_I2C_BUS	1
 
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0
-
 #define I2C_SOFT_DECLARATIONS
 
 #define GPIO_I2C_SCL		AT91_PIO_PORTA, 24
@@ -122,21 +86,9 @@
 #define I2C_DELAY	udelay(100)
 #define I2C_READ	at91_get_pio_value(AT91_PIO_PORTA, 23)
 
-/* DHCP/BOOTP options */
-#ifdef CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_SYS_AUTOLOAD	"n"
-#endif
-
 /* File systems */
 
 /* Boot command */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_BOOTCOMMAND	"sf probe 0:0; " \
-				"sf read 0x22000000 0xc6000 0x294000; " \
-				"bootm 0x22000000"
 
 /* Misc. u-boot settings */