X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fethernut5.h;h=3231f3cc0350e09a1fbc002b131b85f22f218f63;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=0d84c97b9860c72901730261a1a29966cc058ebb;hpb=2fe88d452268d61b5ca9cb0b1dda2974cc43faeb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 0d84c97..3231f3c 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -14,13 +14,8 @@
 /* The first stage boot loader expects u-boot running at this address. */
 
 /* The first stage boot loader takes care of low level initialization. */
-#define CONFIG_SKIP_LOWLEVEL_INIT
-
-/* Set our official architecture number. */
-#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768	/* slow clock xtal */
@@ -35,26 +30,14 @@
 /* 128MB SDRAM in 1 bank */
 #define CONFIG_SYS_SDRAM_BASE		0x20000000
 #define CONFIG_SYS_SDRAM_SIZE		(128 << 20)
-#define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
-#define CONFIG_LOADADDR			CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (1 << 20))
-#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE \
-					- CONFIG_SYS_MALLOC_LEN)
 
 /* 512kB on-chip NOR flash */
-# define CONFIG_SYS_MAX_FLASH_BANKS	1
 # define CONFIG_SYS_FLASH_BASE		0x00200000 /* AT91SAM9XE_FLASH_BASE */
-# define CONFIG_AT91_EFLASH
 # define CONFIG_SYS_MAX_FLASH_SECT	32
 # define CONFIG_EFLASH_PROTSECTORS	1
 
 
 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
-#define CONFIG_ENV_OFFSET	0x3DE000
-#define CONFIG_ENV_SIZE		(132 << 10)
-#define CONFIG_ENV_SECT_SIZE	CONFIG_ENV_SIZE
-#define CONFIG_ENV_SPI_MAX_HZ	15000000
 
 /* NAND flash */
 #ifdef CONFIG_CMD_NAND
@@ -69,21 +52,13 @@
 #endif
 
 /* JFFS2 */
-#ifdef CONFIG_CMD_JFFS2
-#define CONFIG_JFFS2_CMDLINE
-#define CONFIG_JFFS2_NAND
-#endif
 
 /* Ethernet */
-#define CONFIG_NET_RETRY_COUNT		20
-#define CONFIG_MACB
-#define CONFIG_RMII
 #define CONFIG_PHY_ID			0
 #define CONFIG_MACB_SEARCH_PHY
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIO_PORTC, 8
 #endif
 
@@ -100,18 +75,12 @@
 
 /* RTC */
 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
-#define CONFIG_RTC_PCF8563
 #define CONFIG_SYS_I2C_RTC_ADDR		0x51
 #endif
 
 /* I2C */
 #define CONFIG_SYS_MAX_I2C_BUS	1
 
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_SOFT			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SOFT_SPEED	100000
-#define CONFIG_SYS_I2C_SOFT_SLAVE	0
-
 #define I2C_SOFT_DECLARATIONS
 
 #define GPIO_I2C_SCL		AT91_PIO_PORTA, 24
@@ -134,19 +103,12 @@
 
 /* DHCP/BOOTP options */
 #ifdef CONFIG_CMD_DHCP
-#define CONFIG_BOOTP_BOOTFILESIZE
 #define CONFIG_SYS_AUTOLOAD	"n"
 #endif
 
 /* File systems */
 
 /* Boot command */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_INITRD_TAG
-#define CONFIG_BOOTCOMMAND	"sf probe 0:0; " \
-				"sf read 0x22000000 0xc6000 0x294000; " \
-				"bootm 0x22000000"
 
 /* Misc. u-boot settings */