X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fethernut5.h;h=03fa0a328f8fae96303d6f28e0cb5d298b394de0;hb=92a1babf75e90b45026ef0b0e83a6be0343fb70a;hp=4c69af6af3f30da2d60994a3559e95426b8e3468;hpb=019b57cc1d280c3768e2e8a7ff22e07a64c2f670;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h
index 4c69af6..03fa0a3 100644
--- a/include/configs/ethernut5.h
+++ b/include/configs/ethernut5.h
@@ -12,8 +12,6 @@
 
 #include <asm/hardware.h>
 
-#define CONFIG_SYS_GENERIC_BOARD
-
 /* The first stage boot loader expects u-boot running at this address. */
 #define CONFIG_SYS_TEXT_BASE	0x27000000	/* 16MB available */
 
@@ -21,11 +19,9 @@
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
 /* Set our official architecture number. */
-#define MACH_TYPE_ETHERNUT5 1971
 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
 
 /* CPU information */
-#define CONFIG_DISPLAY_CPUINFO		/* Display at console. */
 #define CONFIG_ARCH_CPU_INIT
 
 /* ARM asynchronous clock */
@@ -60,8 +56,6 @@
 /* 512kB DataFlash at NPCS0 */
 #define CONFIG_SYS_MAX_DATAFLASH_BANKS	1
 #define CONFIG_HAS_DATAFLASH
-#define CONFIG_SPI_FLASH
-#define CONFIG_SPI_FLASH_ATMEL
 #define CONFIG_ATMEL_DATAFLASH_SPI
 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0	0xC0000000
 #define DATAFLASH_TCSS			(0x1a << 16)
@@ -78,7 +72,6 @@
 
 /* SPI */
 #define CONFIG_ATMEL_SPI
-#define CONFIG_SYS_SPI_WRITE_TOUT	(5 * CONFIG_SYS_HZ)
 #define AT91_SPI_CLK			15000000
 
 /* Serial port */
@@ -92,51 +85,17 @@
 #define CONFIG_AT91_GPIO
 
 /* Command line configuration */
-#include <config_cmd_default.h>
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_LOADS
-
 #define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_MII
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_CMD_NAND
-#define CONFIG_CMD_SPI
-
-#ifdef MINIMAL_LOADER
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_EDITENV
-#undef CONFIG_CMD_IMI
-#undef CONFIG_CMD_ITEST
-#undef CONFIG_CMD_IMLS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_SETGETDCR
-#undef CONFIG_CMD_XIMG
-#else
-#define CONFIG_CMD_ASKENV
+
+#ifndef MINIMAL_LOADER
 #define CONFIG_CMD_BSP
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
 #define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DNS
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_MMC
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_RARP
 #define CONFIG_CMD_REISER
 #define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SETEXPR
-#define CONFIG_CMD_SF
-#define CONFIG_CMD_SNTP
-#define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_UNZIP
-#define CONFIG_CMD_USB
 #endif
 
 /* NAND flash */
@@ -154,7 +113,6 @@
 
 /* JFFS2 */
 #ifdef CONFIG_CMD_JFFS2
-#define CONFIG_MTD_NAND_ECC_JFFS2
 #define CONFIG_JFFS2_CMDLINE
 #define CONFIG_JFFS2_NAND
 #endif
@@ -168,7 +126,6 @@
 
 /* MMC */
 #ifdef CONFIG_CMD_MMC
-#define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_SYS_MMC_CD_PIN		AT91_PIO_PORTC, 8
@@ -183,7 +140,6 @@
 #define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00500000
 #define CONFIG_SYS_USB_OHCI_SLOT_NAME	"host"
 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
-#define CONFIG_USB_STORAGE
 #endif
 
 /* RTC */
@@ -236,15 +192,10 @@
 #define MTDIDS_DEFAULT		"nand0=atmel_nand"
 #define MTDPARTS_DEFAULT	"mtdparts=atmel_nand:-(root)"
 #endif
-#if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
-	defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
-#define CONFIG_DOS_PARTITION
-#endif
 #define CONFIG_LZO
 #define CONFIG_RBTREE
 
 /* Boot command */
-#define CONFIG_BOOTDELAY	3
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
@@ -257,8 +208,6 @@
 #endif
 
 /* Misc. u-boot settings */
-#define CONFIG_SYS_PROMPT		"U-Boot> "
-#define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_CBSIZE		256
 #define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + 16 \