X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fel6x_common.h;h=7fc3459ef2952bc32dfe0c087163dd17bae1f04d;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=ecd0ee240a50c527027664400aa861a129867eaa;hpb=55dabcc8f24598e2777f663de09ab55fbe1269da;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/el6x_common.h b/include/configs/el6x_common.h
index ecd0ee2..7fc3459 100644
--- a/include/configs/el6x_common.h
+++ b/include/configs/el6x_common.h
@@ -10,13 +10,8 @@
 
 #include <linux/stringify.h>
 
-#define CONFIG_BOARD_NAME		EL6Q
-
 #include "mx6_common.h"
 
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
-
 #ifdef CONFIG_SPL
 #include "imx6_spl.h"
 #endif
@@ -25,16 +20,7 @@
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 
-/* I2C config */
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
-#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
-#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
-#define CONFIG_SYS_I2C_SPEED			100000
-
 /* PMIC */
-#define CONFIG_POWER
-#define CONFIG_POWER_I2C
 #define CONFIG_POWER_PFUZE100
 #define CONFIG_POWER_PFUZE100_I2C_ADDR	0x08
 
@@ -42,10 +28,8 @@
 
 #define CONFIG_MXC_UART_BASE	UART2_BASE
 
-#define CONFIG_BOARD_NAME	EL6Q
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                               \
-	"board="__stringify(CONFIG_BOARD_NAME)"\0"                              \
+	"board=EL6Q\0"								\
 	"cma_size="__stringify(EL6Q_CMA_SIZE)"\0"                               \
 	"chp_size="__stringify(EL6Q_COHERENT_POOL_SIZE)"\0"                     \
 	"console=" CONSOLE_DEV "\0"					\
@@ -54,9 +38,9 @@
 	"fdt_addr_r=0x18000000\0" \
 	"fdt_addr=0x18000000\0" \
 	"findfdt=setenv fdtfile " CONFIG_DEFAULT_FDT_FILE "\0"                  \
-	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
-	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
-	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
+	"kernel_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"scriptaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
+	"pxefile_addr_r=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
 	BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
@@ -67,8 +51,6 @@
 
 #include <config_distro_bootcmd.h>
 
-#define CONFIG_ARP_TIMEOUT     200UL
-
 /* Physical Memory Map */
 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 
@@ -76,11 +58,6 @@
 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
-
 /* environment organization */
 
 #endif                         /* __EL6Q_COMMON_CONFIG_H */