X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fefikamx.h;h=439b5f3fe22b8e145fc966073f58b5b234634e2e;hb=3d6ba91e793808d1612152e9f9b8c51b3ca6c926;hp=b507786bf245413f5f03c5d0dc6efa1ec421afa2;hpb=87a5d601031652293ec4b729fdb7ee01bbd940a8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h
index b507786..439b5f3 100644
--- a/include/configs/efikamx.h
+++ b/include/configs/efikamx.h
@@ -44,6 +44,10 @@
 
 #define CONFIG_SYS_TEXT_BASE		0x97800000
 
+#define	CONFIG_L2_OFF
+#define	CONFIG_SYS_ICACHE_OFF
+#define	CONFIG_SYS_DCACHE_OFF
+
 /*
  * Bootloader Components Configuration
  */
@@ -53,6 +57,8 @@
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_IDE
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DATE
 #undef CONFIG_CMD_IMLS
 
 /*
@@ -85,10 +91,9 @@
  * Hardware drivers
  */
 #define CONFIG_MXC_UART
-#define CONFIG_SYS_MX51_UART1
+#define CONFIG_MXC_UART_BASE		UART1_BASE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200
-#define CONFIG_SYS_BAUDRATE_TABLE	{9600, 19200, 38400, 57600, 115200}
 
 #define CONFIG_MXC_GPIO
 
@@ -107,7 +112,7 @@
 
 #define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_SST
-#define CONFIG_SPI_FLASH_CS		(1 | 121 << 8)
+#define CONFIG_SF_DEFAULT_CS		(1 | 121 << 8)
 #define CONFIG_SF_DEFAULT_MODE		(SPI_MODE_0)
 #define CONFIG_SF_DEFAULT_SPEED		25000000
 
@@ -132,7 +137,7 @@
 #define CONFIG_FSL_PMIC_CLK		25000000
 #define CONFIG_FSL_PMIC_MODE		(SPI_MODE_0 | SPI_CS_HIGH)
 #define CONFIG_FSL_PMIC_BITLEN	32
-#define CONFIG_RTC_MC13783
+#define CONFIG_RTC_MC13XXX
 #endif
 
 /*
@@ -175,17 +180,45 @@
 #endif
 
 /*
+ * USB
+ */
+#define	CONFIG_CMD_USB
+#ifdef	CONFIG_CMD_USB
+#define	CONFIG_USB_EHCI			/* Enable EHCI USB support */
+#define	CONFIG_USB_EHCI_MX5
+#define	CONFIG_USB_ULPI
+#define	CONFIG_USB_ULPI_VIEWPORT
+#define	CONFIG_MXC_USB_PORT	1
+#if	(CONFIG_MXC_USB_PORT == 0)
+#define	CONFIG_MXC_USB_PORTSC	(1 << 28)
+#define	CONFIG_MXC_USB_FLAGS	MXC_EHCI_INTERNAL_PHY
+#else
+#define	CONFIG_MXC_USB_PORTSC	(2 << 30)
+#define	CONFIG_MXC_USB_FLAGS	0
+#endif
+#define	CONFIG_EHCI_IS_TDI
+#define	CONFIG_USB_STORAGE
+#define	CONFIG_USB_HOST_ETHER
+#define	CONFIG_USB_KEYBOARD
+#define	CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
+#define CONFIG_PREBOOT
+/* USB NET */
+#ifdef	CONFIG_CMD_NET
+#define	CONFIG_USB_ETHER_ASIX
+#define	CONFIG_CMD_PING
+#define	CONFIG_CMD_DHCP
+#endif
+#endif /* CONFIG_CMD_USB */
+
+/*
  * Filesystems
  */
 #ifdef CONFIG_CMD_FAT
 #define CONFIG_DOS_PARTITION
+#ifdef	CONFIG_CMD_NET
+#define	CONFIG_CMD_NFS
+#endif
 #endif
-
-#undef CONFIG_CMD_PING
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-#define CONFIG_CMD_DATE
 
 /*
  * Miscellaneous configurable options
@@ -196,7 +229,6 @@
 
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 #define CONFIG_SYS_PROMPT		"Efika> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
@@ -206,7 +238,7 @@
 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 
 #define CONFIG_SYS_MEMTEST_START	0x90000000
-#define CONFIG_SYS_MEMTEST_END		0x10000
+#define CONFIG_SYS_MEMTEST_END		0x90010000
 
 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
 
@@ -214,13 +246,6 @@
 #define CONFIG_CMDLINE_EDITING
 
 /*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE	(128 * 1024)	/* regular stack */
-
-/*-----------------------------------------------------------------------
  * Physical Memory Map
  */
 #define CONFIG_NR_DRAM_BANKS		1