X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fedminiv2.h;h=90e387e6c5e7ac8b58c8e18d3c769850ab5cbb15;hb=0f9595b9fa68ed1634adddf989fd037909eec433;hp=645fc3ffb81c1f91b9895315a039ca2bc2be7f61;hpb=0a3d59e01038a3a50484b8bfcf834376a7215af0;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 645fc3f..90e387e 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -15,7 +15,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_TEXT_BASE		0xffff0000
 #define CONFIG_SPL_MAX_SIZE		0x0000fff0
 #define CONFIG_SPL_STACK		0x00020000
 #define CONFIG_SPL_BSS_START_ADDR	0x00020000
@@ -29,9 +28,6 @@
  * High Level Configuration Options (easy to change)
  */
 
-#define CONFIG_FEROCEON		1	/* CPU Core subversion */
-#define CONFIG_88F5182		1	/* SOC Name */
-
 #include <asm/arch/orion5x.h>
 /*
  * CLKs configurations
@@ -89,25 +85,12 @@
  * FLASH configuration
  */
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	1  /* max num of flash banks       */
 #define CONFIG_SYS_MAX_FLASH_SECT	11 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BASE		0xfff80000
 
 /* auto boot */
 
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs  */
-#define CONFIG_INITRD_TAG	1	/* enable INITRD tag */
-#define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
-
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-/*
- * Commands configuration
- */
 
 /*
  * Network
@@ -118,9 +101,7 @@
 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION	/* don't randomize MAC */
 #define CONFIG_PHY_BASE_ADR	0x8
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
-#define CONFIG_NETCONSOLE	/* include NetConsole support   */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
-#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #endif
 
 /*
@@ -128,11 +109,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-/* ED Mini V has an IDE-compatible SATA connector for port 1 */
-#define CONFIG_MVSATA_IDE_USE_PORT1
-/* Needs byte-swapping for ATA data register */
-#define CONFIG_IDE_SWAP_IO
 /* Data, registers and alternate blocks are at the same offset */
 #define CONFIG_SYS_ATA_DATA_OFFSET	(0x0100)
 #define CONFIG_SYS_ATA_REG_OFFSET	(0x0100)
@@ -162,34 +138,12 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE0		ORION5X_TWSI_BASE
-#define CONFIG_SYS_I2C_SLAVE		0x0
-#define CONFIG_SYS_I2C_SPEED		100000
 #endif
 
 /*
  *  Environment variables configurations
  */
-#define CONFIG_ENV_SECT_SIZE		0x2000	/* 16K */
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_OFFSET		0x4000	/* env starts here */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 256) /* 256kB for malloc() */
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-
-#define CONFIG_SYS_LOAD_ADDR		0x00800000
-#define CONFIG_SYS_MEMTEST_START	0x00400000
-#define CONFIG_SYS_MEMTEST_END		0x007fffff
-#define CONFIG_SYS_RESET_ADDRESS	0xffff0000
 
 /* Enable command line editing */