X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fedminiv2.h;h=89aa11c0ed4361aa6d1d836caed7659615db40a2;hb=2fe88d452268d61b5ca9cb0b1dda2974cc43faeb;hp=235b7461f503b3bc12975fc4e9684df68f0bf465;hpb=0ee89f2daf94454bb8237bbfbdb6b0d8eed84481;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 235b746..89aa11c 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
  *
@@ -5,8 +6,6 @@
  * (C) Copyright 2009
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_EDMINIV2_H
@@ -16,7 +15,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TEXT_BASE		0xffff0000
 #define CONFIG_SPL_MAX_SIZE		0x0000fff0
 #define CONFIG_SPL_STACK		0x00020000
@@ -26,7 +24,6 @@
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x0001ffff
 #define CONFIG_SYS_UBOOT_BASE		0xfff90000
 #define CONFIG_SYS_UBOOT_START		0x00800000
-#define CONFIG_SYS_TEXT_BASE 		0x00800000
 
 /*
  * High Level Configuration Options (easy to change)
@@ -35,7 +32,6 @@
 #define CONFIG_MARVELL		1
 #define CONFIG_FEROCEON		1	/* CPU Core subversion */
 #define CONFIG_88F5182		1	/* SOC Name */
-#define CONFIG_MACH_EDMINIV2	1	/* Machine type */
 
 #include <asm/arch/orion5x.h>
 /*
@@ -87,7 +83,6 @@
  * for your console driver.
  */
 
-#define CONFIG_CONS_INDEX	1	/*Console on UART0 */
 #define CONFIG_SYS_BAUDRATE_TABLE \
 	{ 9600, 19200, 38400, 57600, 115200, 230400, 460800, 921600 }
 
@@ -95,8 +90,6 @@
  * FLASH configuration
  */
 
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_MAX_FLASH_BANKS	1  /* max num of flash banks       */
 #define CONFIG_SYS_MAX_FLASH_SECT	11 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BASE		0xfff80000
@@ -113,8 +106,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS 1	/* enable memory tag */
 
 #define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-#define	CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE \
-		+sizeof(CONFIG_SYS_PROMPT) + 16)	/* Print Buff */
 /*
  * Commands configuration
  */
@@ -124,13 +115,11 @@
  */
 
 #ifdef CONFIG_CMD_NET
-#define CONFIG_MVGBE				/* Enable Marvell GbE Driver */
 #define CONFIG_MVGBE_PORTS	{1}		/* enable port 0 only */
 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION	/* don't randomize MAC */
 #define CONFIG_PHY_BASE_ADR	0x8
 #define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
 #define CONFIG_NETCONSOLE	/* include NetConsole support   */
-#define	CONFIG_MII		/* expose smi ove miiphy interface */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
 #endif
@@ -142,7 +131,6 @@
 #define __io
 #define CONFIG_IDE_PREINIT
 /* ED Mini V has an IDE-compatible SATA connector for port 1 */
-#define CONFIG_MVSATA_IDE
 #define CONFIG_MVSATA_IDE_USE_PORT1
 /* Needs byte-swapping for ATA data register */
 #define CONFIG_IDE_SWAP_IO
@@ -169,7 +157,6 @@
  */
 #ifdef CONFIG_CMD_USB
 #define ORION5X_USB20_HOST_PORT_BASE ORION5X_USB20_PORT0_BASE
-#define CONFIG_SUPPORT_VFAT
 #endif /* CONFIG_CMD_USB */
 
 /*
@@ -199,19 +186,15 @@
  * Other required minimal configurations
  */
 #define CONFIG_ARCH_CPU_INIT		/* call arch_cpu_init() */
-#define CONFIG_NR_DRAM_BANKS		1
 
 #define CONFIG_SYS_LOAD_ADDR		0x00800000
 #define CONFIG_SYS_MEMTEST_START	0x00400000
 #define CONFIG_SYS_MEMTEST_END		0x007fffff
 #define CONFIG_SYS_RESET_ADDRESS	0xffff0000
-#define CONFIG_SYS_MAXARGS		16
 
 /* Enable command line editing */
-#define CONFIG_CMDLINE_EDITING
 
 /* provide extensive help */
-#define CONFIG_SYS_LONGHELP
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0