X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fedminiv2.h;h=86257016824fc11f2a56d58e75ae4e0f52eab210;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=a599722ae3bd565f022eee20e18199e4a3f2ca14;hpb=d2da54bfc45371e4f5c31409554dfc78da1e2329;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index a599722..8625701 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -15,12 +15,6 @@
  * SPL
  */
 
-#define CONFIG_SPL_MAX_SIZE		0x0000fff0
-#define CONFIG_SPL_STACK		0x00020000
-#define CONFIG_SPL_BSS_START_ADDR	0x00020000
-#define CONFIG_SPL_BSS_MAX_SIZE		0x0001ffff
-#define CONFIG_SYS_SPL_MALLOC_START	0x00040000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x0001ffff
 #define CONFIG_SYS_UBOOT_BASE		0xfff90000
 #define CONFIG_SYS_UBOOT_START		0x00800000
 
@@ -90,8 +84,6 @@
 
 /* auto boot */
 
-#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */
-
 /*
  * Network
  */
@@ -100,8 +92,6 @@
 #define CONFIG_MVGBE_PORTS	{1}		/* enable port 0 only */
 #define CONFIG_SKIP_LOCAL_MAC_RANDOMIZATION	/* don't randomize MAC */
 #define CONFIG_PHY_BASE_ADR	0x8
-#define CONFIG_RESET_PHY_R	/* use reset_phy() to init mv8831116 PHY */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN	/* detect link using phy */
 #endif
 
 /*
@@ -111,8 +101,6 @@
 #define __io
 /* Data, registers and alternate blocks are at the same offset */
 /* Each 8-bit ATA register is aligned to a 4-bytes address */
-/* Controller supports 48-bits LBA addressing */
-#define CONFIG_LBA48
 /* A single bus, a single device */
 /* ATA registers base is at SATA controller base */
 /* ATA bus 0 is orion5x port 1 on ED Mini V2 */
@@ -143,7 +131,5 @@
 
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE		0
-#define CONFIG_SYS_INIT_SP_ADDR	\
-	(CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE)
 
 #endif /* _CONFIG_EDMINIV2_H */