X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fedminiv2.h;h=5ce01fb2aea5081ca0bfe38809a0f2c26b049879;hb=1d2f74690cace803844bce198a6d5fa1b6cd11f9;hp=9b7cc66c658a07ca776c64eaa26c0544359f10e4;hpb=e390e8709149664ff96cf19384264c84573f3082;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index 9b7cc66..5ce01fb 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -6,28 +6,37 @@
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_EDMINIV2_H
 #define _CONFIG_EDMINIV2_H
 
+/* general settings */
+#define CONFIG_SYS_GENERIC_BOARD
+
+/*
+ * SPL
+ */
+
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_NOR_SUPPORT
+#define CONFIG_SPL_TEXT_BASE		0xffff0000
+#define CONFIG_SPL_MAX_SIZE		0x0000fff0
+#define CONFIG_SPL_STACK		0x00020000
+#define CONFIG_SPL_BSS_START_ADDR	0x00020000
+#define CONFIG_SPL_BSS_MAX_SIZE		0x0001ffff
+#define CONFIG_SYS_SPL_MALLOC_START	0x00040000
+#define CONFIG_SYS_SPL_MALLOC_SIZE	0x0001ffff
+#define CONFIG_SPL_LDSCRIPT            "$(CPUDIR)/orion5x/u-boot-spl.lds"
+#define CONFIG_SPL_BOARD_INIT
+#define CONFIG_SYS_UBOOT_BASE		0xfff90000
+#define CONFIG_SYS_UBOOT_START		0x00800000
+#define CONFIG_SYS_TEXT_BASE 		0x00800000
+
 /*
  * Version number information
  */
@@ -39,9 +48,7 @@
  */
 
 #define CONFIG_MARVELL		1
-#define CONFIG_ARM926EJS	1	/* Basic Architecture */
 #define CONFIG_FEROCEON		1	/* CPU Core subversion */
-#define CONFIG_ORION5X		1	/* SOC Family Name */
 #define CONFIG_88F5182		1	/* SOC Name */
 #define CONFIG_MACH_EDMINIV2	1	/* Machine type */
 
@@ -50,8 +57,6 @@
  * CLKs configurations
  */
 
-#define CONFIG_SYS_HZ		1000
-
 /*
  * Board-specific values for Orion5x MPP low level init:
  * - MPPs 12 to 15 are SATA LEDs (mode 5)
@@ -69,13 +74,18 @@
  * - GPIO16 is Power LED control (0 = on, 1 = off)
  * - GPIO17 is Power LED source select (0 = CPLD, 1 = GPIO16)
  * - GPIO18 is Power Button status (0 = Released, 1 = Pressed)
- * - Last GPIO is 26, further bits are supposed to be 0.
+ * - GPIO19 is SATA disk power toggle (toggles on 0-to-1)
+ * - GPIO22 is SATA disk power status ()
+ * - GPIO23 is supply status for SATA disk ()
+ * - GPIO24 is supply control for board (write 1 to power off)
+ * Last GPIO is 25, further bits are supposed to be 0.
  * Enable mask has ones for INPUT, 0 for OUTPUT.
- * Default is LED ON.
+ * Default is LED ON, board ON :)
  */
 
-#define ORION5X_GPIO_OUT_ENABLE	0x03fcffff
-#define ORION5X_GPIO_OUT_VALUE	0x03fcffff
+#define ORION5X_GPIO_OUT_ENABLE		0xfef4f0ca
+#define ORION5X_GPIO_OUT_VALUE		0x00000000
+#define ORION5X_GPIO_IN_POLARITY	0x000000d0
 
 /*
  * NS16550 Configuration
@@ -104,13 +114,9 @@
 
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_LEGACY
 #define CONFIG_SYS_MAX_FLASH_BANKS	1  /* max num of flash banks       */
 #define CONFIG_SYS_MAX_FLASH_SECT	11 /* max num of sects on one chip */
 #define CONFIG_SYS_FLASH_BASE		0xfff80000
-#define CONFIG_SYS_FLASH_SECTSZ \
-	{16384, 8192, 8192, 32768, \
-	 65536, 65536, 65536, 65536, 65536, 65536, 65536}
 
 /* auto boot */
 #define CONFIG_BOOTDELAY	3	/* default enable autoboot */
@@ -200,7 +206,8 @@
  * I2C related stuff
  */
 #ifdef CONFIG_CMD_I2C
-#define CONFIG_I2C_MVTWSI
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
 #define CONFIG_I2C_MVTWSI_BASE		ORION5X_TWSI_BASE
 #define CONFIG_SYS_I2C_SLAVE		0x0
 #define CONFIG_SYS_I2C_SPEED		100000
@@ -217,7 +224,7 @@
 /*
  * Size of malloc() pool
  */
-#define CONFIG_SYS_MALLOC_LEN	(1024 * 128) /* 128kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN	(1024 * 256) /* 256kB for malloc() */
 
 /*
  * Other required minimal configurations
@@ -228,7 +235,6 @@
 #define CONFIG_DISPLAY_CPUINFO		/* Display cpu info */
 #define CONFIG_NR_DRAM_BANKS		1
 
-#define CONFIG_STACKSIZE		0x00100000
 #define CONFIG_SYS_LOAD_ADDR		0x00800000
 #define CONFIG_SYS_MEMTEST_START	0x00400000
 #define CONFIG_SYS_MEMTEST_END		0x007fffff
@@ -237,7 +243,6 @@
 
 /* Use the HUSH parser */
 #define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
 
 /* Enable command line editing */
 #define CONFIG_CMDLINE_EDITING