X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fea20.h;h=e8fc753efef2a0a55b1459919d1ef5a85403bdab;hb=86cf1c82850f7c226f23684e19616e526ffaf10f;hp=75353cd11239e20237b65610f44a7f1f26f13afc;hpb=6f6b7cfa89e5aa3b643196a4ccc8b1ba5d6fa7a4;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ea20.h b/include/configs/ea20.h
index 75353cd..e8fc753 100644
--- a/include/configs/ea20.h
+++ b/include/configs/ea20.h
@@ -1,11 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
  *
  * Based on davinci_dvevm.h. Original Copyrights follow:
  *
  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -29,7 +28,6 @@
 #define CONFIG_SYS_TIMERBASE		DAVINCI_TIMER0_BASE
 #define CONFIG_SYS_HZ_CLOCK		clk_get(DAVINCI_AUXCLK_CLKID)
 #define CONFIG_SKIP_LOWLEVEL_INIT
-#define CONFIG_DA8XX_GPIO
 
 /*
  * Memory Info
@@ -45,8 +43,6 @@
 /* memtest will be run on 16MB */
 #define CONFIG_SYS_MEMTEST_END	(PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
 
-#define CONFIG_NR_DRAM_BANKS	1 /* we have 1 bank of DRAM */
-
 /*
  * Serial Driver info
  */
@@ -55,7 +51,6 @@
 #define CONFIG_SYS_NS16550_COM1	DAVINCI_UART0_BASE /* Base address of UART0 */
 #define CONFIG_SYS_NS16550_CLK	clk_get(DAVINCI_UART2_CLKID)
 
-#define CONFIG_SPI
 #define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
 #define CONFIG_SYS_SPI_CLK		clk_get(DAVINCI_SPI1_CLKID)
 #define CONFIG_SF_DEFAULT_SPEED		30000000
@@ -113,15 +108,8 @@
 #define CONFIG_CLOCKS
 #endif
 
-#ifndef CONFIG_DRIVER_TI_EMAC
-#endif
-
 /* NAND Setup */
 #ifdef CONFIG_SYS_USE_NAND
-#define CONFIG_MTD_DEVICE
-#define CONFIG_MTD_PARTITIONS
-
-#define CONFIG_NAND_DAVINCI
 #define	CONFIG_SYS_NAND_PAGE_2K
 #define CONFIG_SYS_NAND_NO_SUBPAGE
 #define CONFIG_SYS_NAND_CS		2
@@ -132,10 +120,6 @@
 #define CONFIG_SYS_MAX_NAND_DEVICE	1 /* Max number of NAND devices */
 #endif
 
-/* SPI Flash */
-#ifdef CONFIG_USE_SPIFLASH
-#endif
-
 #if !defined(CONFIG_SYS_USE_NAND) && \
 	!defined(CONFIG_USE_NOR) && \
 	!defined(CONFIG_USE_SPIFLASH)
@@ -151,7 +135,7 @@
  * to update uboot and load kernel
  */
 
-#define CONFIG_HOSTNAME ea20
+#define CONFIG_HOSTNAME "ea20"
 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"as=3\0"							\
 	"netdev=eth0\0"						\
@@ -188,9 +172,9 @@
 	"loadaddr=c0000014\0"						\
 	"memory=32M\0"							\
 	"kernel_addr_r=c0700000\0"					\
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"			\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
-	"ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0"	\
+	"hostname=" CONFIG_HOSTNAME "\0"			\
+	"bootfile=" CONFIG_HOSTNAME "/uImage\0"		\
+	"ramdisk_file=" CONFIG_HOSTNAME "/image.ext2\0"	\
 	"flash_self=run ramargs addip addtty addmtd addmisc addmem;"	\
 			"bootm ${kernel_addr_r}\0"			\
 	"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;"	\
@@ -219,7 +203,7 @@
 	"net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs"	\
 		" addip addtty addmtd addmisc addmem;"			\
 		"clrlogo;bootm ${kernel_addr_r}\0"			\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0"		\
+	"u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"		\
 	"load_magic=if sf probe 0;then sf "				\
 		"read c0000000 0x10000 0x60000;fi\0"			\
 	"load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;"		\