X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fds414.h;h=e3693767b66de95fd5a71e8b768f66edc628d447;hb=6d7dacf726ca043a3f5487549bbfa506c990c813;hp=c840c935b255a53b32ba4e6cffe7467f98a617e5;hpb=748277c415ff5bd74d6913928cab2a3da6a0b69f;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ds414.h b/include/configs/ds414.h
index c840c93..e369376 100644
--- a/include/configs/ds414.h
+++ b/include/configs/ds414.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2014 Stefan Roese <sr@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_SYNOLOGY_DS414_H
@@ -10,14 +9,12 @@
 /*
  * High Level Configuration Options (easy to change)
  */
-#define CONFIG_DISPLAY_BOARDINFO_LATE
 
 /*
  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  * for DDR ECC byte filling in the SPL before loading the main
  * U-Boot into it.
  */
-#define	CONFIG_SYS_TEXT_BASE	0x00800000
 #define CONFIG_SYS_TCLK		250000000	/* 250MHz */
 
 /*
@@ -31,24 +28,12 @@
 #define CONFIG_SYS_I2C_SLAVE		0x0
 #define CONFIG_SYS_I2C_SPEED		100000
 
-/* SPI NOR flash default params, used by sf commands */
-#define CONFIG_SF_DEFAULT_SPEED		1000000
-#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
-
 /* Environment in SPI NOR flash */
-#define CONFIG_ENV_OFFSET		0x7E0000   /* RedBoot config partition in DTS */
-#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
-#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64KiB sectors */
 
-#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
-#define CONFIG_PHY_ADDR			{ 0x1, 0x0 }
 #define CONFIG_SYS_NETA_INTERFACE_TYPE	PHY_INTERFACE_MODE_RGMII
 
-#define CONFIG_SYS_ALT_MEMTEST
-
 /* PCIe support */
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_PCI_MVEBU
 #define CONFIG_PCI_SCAN_SHOW
 #endif
 
@@ -68,7 +53,6 @@
 #endif
 
 /* why is this only defined in mv-common.h if CONFIG_DM is undefined? */
-#define CONFIG_SYS_MVFS
 
 /*
  * mv-common.h should be defined after CMD configs since it used them
@@ -91,8 +75,6 @@
 
 /* SPL */
 /* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_TEXT_BASE		0x40004030
 #define CONFIG_SPL_MAX_SIZE		((128 << 10) - 0x4030)
 
 #define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + (128 << 10))
@@ -106,20 +88,12 @@
 #define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
 
 /* SPL related SPI defines */
-#define CONFIG_SPL_SPI_LOAD
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
 
 /* DS414 bus width is 32bits */
 #define CONFIG_DDR_32BIT
 
-/* Use random ethernet address if not configured */
-#define CONFIG_LIB_RAND
-#define CONFIG_NET_RANDOM_ETHADDR
-
 /* Default Environment */
 #define CONFIG_BOOTCOMMAND	"sf read ${loadaddr} 0xd0000 0x700000; bootm"
 #define CONFIG_LOADADDR		0x80000
-#undef CONFIG_PREBOOT		/* override preboot for USB and SPI flash init */
-#define CONFIG_PREBOOT		"usb start; sf probe"
 
 #endif /* _CONFIG_SYNOLOGY_DS414_H */