X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fds109.h;h=8553ea0b95f24da609eb6b194f1fc8a5c296cc3c;hb=46b5c8ed017958fc387ab86c71ae6c90abb6793c;hp=c06f0058deb57381609aeca016536d07ff774280;hpb=83d290c56fab2d38cd1ab4c4cc7099559c1d5046;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/ds109.h b/include/configs/ds109.h
index c06f005..8553ea0 100644
--- a/include/configs/ds109.h
+++ b/include/configs/ds109.h
@@ -11,54 +11,20 @@
 #ifndef _CONFIG_DS109_H
 #define _CONFIG_DS109_H
 
-/* Provide the MACH_TYPE value that the vendor kernel requires. */
-#define CONFIG_MACH_TYPE		527
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
-
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_EXT2
-
-/*
- * mv-plug-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
-#include "mv-plug-common.h"
+#include "mv-common.h"
 
 /*
  *  Environment variables configurations
  */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64k */
-#endif
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */
-#endif
 
 /*
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-#define CONFIG_ENV_SIZE			0x10000
-#define CONFIG_ENV_ADDR			0x3d0000
-#define CONFIG_ENV_OFFSET		0x3d0000 /* env starts here */
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
-	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
-	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
-	"bootm 0x6400000;"
 
 #define CONFIG_EXTRA_ENV_SETTINGS	\
 	"x_bootcmd_ethernet=ping 192.168.1.2\0"	\
@@ -66,7 +32,8 @@
 	"x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
 	"x_bootargs=console=ttyS0,115200\0"	\
 	"x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
-	"ipaddr=192.168.1.5\0"
+	"ipaddr=192.168.1.5\0"		\
+	"usb0Mode=host\0"
 
 /*
  * Ethernet Driver configuration
@@ -76,11 +43,4 @@
 #define CONFIG_PHY_BASE_ADR	8
 #endif /* CONFIG_CMD_NET */
 
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
 #endif /* _CONFIG_DS109_H */