X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdreamplug.h;h=5b71f70c94bfe1d5e8d09becdba283f47f8ac2bb;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=0b7d89b98d1ee6abce02013fd7534fb7d837af17;hpb=a85670e40da1ef4f299effb73c36e48d39d50106;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 0b7d89b..5b71f70 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2011
  * Jason Cooper <u-boot@lakedaemon.net>
@@ -5,80 +6,32 @@
  * Based on work by:
  * Marvell Semiconductor <www.marvell.com>
  * Written-by: Siddarth Gore <gores@marvell.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef _CONFIG_DREAMPLUG_H
 #define _CONFIG_DREAMPLUG_H
 
 /*
- * FIXME: This belongs in mach-types.h.  However, we only pull mach-types
- * from Linus' kernel.org tree.  This hasn't been updated primarily due to
- * the recent arch/arm reshuffling.  So, in the meantime, we'll place it
- * here.
- */
-#include <asm/mach-types.h>
-#ifdef MACH_TYPE_DREAMPLUG
-#error "MACH_TYPE_DREAMPLUG has been defined properly, please remove this."
-#else
-#define MACH_TYPE_DREAMPLUG            3550
-#endif
-
-/*
- * Version number information
- */
-#define CONFIG_IDENT_STRING	"\nMarvell-DreamPlug"
-
-/*
  * High Level Configuration Options (easy to change)
  */
 #define CONFIG_SHEEVA_88SV131	1	/* CPU Core subversion */
-#define CONFIG_MACH_TYPE	MACH_TYPE_DREAMPLUG
 
-/*
- * Commands configuration
- */
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-
-/*
- * mv-plug-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
 #include "mv-plug-common.h"
 
 /*
  *  Environment variables configurations
  */
-#ifdef CONFIG_SPI_FLASH
-#define CONFIG_ENV_IS_IN_SPI_FLASH	1
-#define CONFIG_ENV_SECT_SIZE		0x10000	/* 64k */
-#else
-#define CONFIG_ENV_IS_NOWHERE		1	/* if env in SDRAM */
-#endif
-
-#ifdef CONFIG_CMD_SF
-#define CONFIG_HARD_SPI			1
-#define CONFIG_KIRKWOOD_SPI		1
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		50000000 /* 50 MHz */
-#endif
 
 /*
  * max 4k env size is enough, but in case of nand
  * it has to be rounded to sector size
  */
-#define CONFIG_ENV_SIZE			0x1000  /* 4k */
-#define CONFIG_ENV_ADDR			0x100000
-#define CONFIG_ENV_OFFSET		0x100000 /* env starts here */
 
 /*
  * Default environment variables
  */
-#define CONFIG_BOOTCOMMAND		"setenv ethact egiga0; " \
-	"${x_bootcmd_ethernet}; setenv ethact egiga1; " \
+#define CONFIG_BOOTCOMMAND		"setenv ethact ethernet-controller@72000; " \
+	"${x_bootcmd_ethernet}; setenv ethact ethernet-controller@76000; " \
 	"${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
 	"setenv bootargs ${x_bootargs} ${x_bootargs_root}; "	\
 	"bootm 0x6400000;"
@@ -101,8 +54,9 @@
 /*
  * SATA Driver configuration
  */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
+#ifdef CONFIG_SATA
+#define CONFIG_SYS_SATA_MAX_DEVICE	1
+#define CONFIG_LBA48
+#endif /* CONFIG_SATA */
 
 #endif /* _CONFIG_DREAMPLUG_H */