X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdragonboard410c.h;h=c37b4c635b2740bb7084f3808586091c83c89519;hb=c45568cc4e51b7bbe2f3ce28d8f2566048aeebf3;hp=85ed72c40e0bef3aaa65cc7c225a6987d0a0dc1b;hpb=ba8bf9481b0854fa7d48b0e9ed913c639f187c7d;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index 85ed72c..c37b4c6 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Board configuration file for Dragonboard 410C
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIGS_DRAGONBOARD410C_H
@@ -12,39 +11,15 @@
 #include <linux/sizes.h>
 #include <asm/arch/sysmap-apq8016.h>
 
-#define CONFIG_MISC_INIT_R /* To stop autoboot */
+/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x80000000
-/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
-#define PHYS_SDRAM_1_SIZE		0x3da00000
+/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
+#define PHYS_SDRAM_1_SIZE		SZ_1G
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M
-
-/* UART */
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		19000000
-
-#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
-
-/* Fixup - in init code we switch from device to host mode,
- * it has to be done after each HCD reset */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-/* Support all possible USB ethernet dongles */
-
-/* Extra Commands */
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
 
+/* Environment */
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 1) \
@@ -53,54 +28,6 @@
 
 #include <config_distro_bootcmd.h>
 
-/* Does what recovery does */
-#define REFLASH(file, part) \
-"part start mmc 0 "#part" start && "\
-"part size mmc 0 "#part" size && "\
-"tftp $loadaddr "#file" && " \
-"mmc write $loadaddr $start $size && "
-
-#define CONFIG_ENV_REFLASH \
-"mmc dev 0 && "\
-"usb start && "\
-"dhcp && "\
-"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
-"mmc write $loadaddr 0 43 && " \
-"mmc rescan && "\
-REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
-REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
-REFLASH(dragonboard/rescue/rpm.mbn, 3)\
-REFLASH(dragonboard/rescue/tz.mbn, 4)\
-REFLASH(dragonboard/rescue/hyp.mbn, 5)\
-REFLASH(dragonboard/rescue/sec.dat, 6)\
-REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
-REFLASH(dragonboard/u-boot.img, 8)\
-"usb stop &&"\
-"echo Reflash completed"
-
-/* Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"reflash="CONFIG_ENV_REFLASH"\0"\
-	"loadaddr=0x81000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
-	"initrd_high=0xffffffffffffffff\0" \
-	"linux_image=Image\0" \
-	"kernel_addr_r=0x81000000\0"\
-	"fdtfile=qcom/apq8016-sbc.dtb\0" \
-	"fdt_addr_r=0x83000000\0"\
-	"ramdisk_addr_r=0x84000000\0"\
-	"scriptaddr=0x90000000\0"\
-	"pxefile_addr_r=0x90100000\0"\
-	BOOTENV
-
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* mmc0 = emmc, mmc1 = sd */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
+#define CONFIG_EXTRA_ENV_SETTINGS BOOTENV
 
 #endif