X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdragonboard410c.h;h=73aec348458a51c5d44d4ac268d175d8047ce0b5;hb=7ff7b46e6ce44b2ee09647a928ce1021c3c8a66e;hp=bf0e0315c26d7c44ef1c039e7239a6598c8d92b9;hpb=f681eacbfeb2598c135ef8e8ba8d5b9298a52a38;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index bf0e031..73aec34 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -11,27 +11,15 @@
 #include <linux/sizes.h>
 #include <asm/arch/sysmap-apq8016.h>
 
+/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
+
 /* Physical Memory Map */
 #define PHYS_SDRAM_1			0x80000000
-/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
-#define PHYS_SDRAM_1_SIZE		0x3da00000
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN		SZ_64M
-
-/* UART */
-
-/* Generic Timer Definitions */
-#define COUNTER_FREQUENCY		19000000
-
-/* Fixup - in init code we switch from device to host mode,
- * it has to be done after each HCD reset */
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-
-/* BOOTP options */
-#define CONFIG_BOOTP_BOOTFILESIZE
+/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
+#define PHYS_SDRAM_1_SIZE		SZ_1G
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 
+/* Environment */
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 1) \
@@ -40,55 +28,6 @@
 
 #include <config_distro_bootcmd.h>
 
-/* Does what recovery does */
-#define REFLASH(file, part) \
-"part start mmc 0 "#part" start && "\
-"part size mmc 0 "#part" size && "\
-"tftp $loadaddr "#file" && " \
-"mmc write $loadaddr $start $size && "
-
-#define CONFIG_ENV_REFLASH \
-"mmc dev 0 && "\
-"usb start && "\
-"dhcp && "\
-"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
-"mmc write $loadaddr 0 43 && " \
-"mmc rescan && "\
-REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
-REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
-REFLASH(dragonboard/rescue/rpm.mbn, 3)\
-REFLASH(dragonboard/rescue/tz.mbn, 4)\
-REFLASH(dragonboard/rescue/hyp.mbn, 5)\
-REFLASH(dragonboard/rescue/sec.dat, 6)\
-REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
-REFLASH(dragonboard/u-boot.img, 8)\
-"usb stop &&"\
-"echo Reflash completed"
-
-/* Environment */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"reflash="CONFIG_ENV_REFLASH"\0"\
-	"loadaddr=0x81000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
-	"initrd_high=0xffffffffffffffff\0" \
-	"linux_image=Image\0" \
-	"kernel_addr_r=0x81000000\0"\
-	"fdtfile=qcom/apq8016-sbc.dtb\0" \
-	"fdt_addr_r=0x83000000\0"\
-	"ramdisk_addr_r=0x84000000\0"\
-	"scriptaddr=0x90000000\0"\
-	"pxefile_addr_r=0x90100000\0"\
-	BOOTENV
-
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_SYS_MMC_ENV_DEV		0	/* mmc0 = emmc, mmc1 = sd */
-#define CONFIG_SYS_MMC_ENV_PART 2 /* Set env partition to BOOT2 partition */
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
-
-/* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_MAXARGS		64	/* max command args */
+#define CFG_EXTRA_ENV_SETTINGS BOOTENV
 
 #endif