X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdragonboard410c.h;h=65537e477824f8baaefd219565244f531c009b79;hb=19ea606109135c3d9892d86e1b1c2a8fb551cc1b;hp=b97c6c424067b6e13c73bd78131cb8ede6ec50c2;hpb=02ccab1908c405fe1449457d4a0d343784a30acb;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index b97c6c4..65537e4 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Board configuration file for Dragonboard 410C
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIGS_DRAGONBOARD410C_H
@@ -12,58 +11,27 @@
 #include <linux/sizes.h>
 #include <asm/arch/sysmap-apq8016.h>
 
-#define CONFIG_MISC_INIT_R /* To stop autoboot */
-
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x80000000
 /* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
 #define PHYS_SDRAM_1_SIZE		0x3da00000
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_TEXT_BASE		0x80080000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN		0x1000000 /* 16MB max kernel size */
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M
 
 /* UART */
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		19000000
 
-#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
-
 /* Fixup - in init code we switch from device to host mode,
  * it has to be done after each HCD reset */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-#define CONFIG_USB_HOST_ETHER /* Enable USB Networking */
-
-/* Support all possible USB ethernet dongles */
-#define CONFIG_USB_ETHER_DM9601
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_ASIX88179
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
-
-/* Extra Commands */
-#define CONFIG_CMD_ENV
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-#define CONFIG_CMD_REGINFO	/* Register dump		*/
-#define CONFIG_CMD_TFTP
-
-/* Partition table support */
-#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
-
-#include <config_distro_defaults.h>
-
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
-/* Environment - Boot*/
-#define CONFIG_BOOTARGS "console=ttyMSM0,115200n8"
-
 #define BOOT_TARGET_DEVICES(func) \
 	func(USB, usb, 0) \
 	func(MMC, mmc, 1) \
@@ -101,29 +69,21 @@ REFLASH(dragonboard/u-boot.img, 8)\
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"reflash="CONFIG_ENV_REFLASH"\0"\
 	"loadaddr=0x81000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
 	"initrd_high=0xffffffffffffffff\0" \
 	"linux_image=Image\0" \
 	"kernel_addr_r=0x81000000\0"\
-	"fdtfile=apq8016-sbc.dtb\0" \
+	"fdtfile=qcom/apq8016-sbc.dtb\0" \
 	"fdt_addr_r=0x83000000\0"\
 	"ramdisk_addr_r=0x84000000\0"\
 	"scriptaddr=0x90000000\0"\
 	"pxefile_addr_r=0x90100000\0"\
 	BOOTENV
 
-#define CONFIG_ENV_IS_NOWHERE
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
 
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
-					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_MAXARGS		64	/* max command args */
 
 #endif