X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdragonboard410c.h;h=624f611c8ba07c9190969c07522b3528ebc1f5ce;hb=e2e5eec6ce1c2cb496a2a5e019a175a9fbdbed2a;hp=ae8dce32fbe4f6c3d824149ecf2a4ca9afcc12c9;hpb=ae3584498bf81aa3be9ae6f90fbb04e07d707276;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dragonboard410c.h b/include/configs/dragonboard410c.h
index ae8dce3..624f611 100644
--- a/include/configs/dragonboard410c.h
+++ b/include/configs/dragonboard410c.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Board configuration file for Dragonboard 410C
  *
  * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIGS_DRAGONBOARD410C_H
@@ -12,46 +11,26 @@
 #include <linux/sizes.h>
 #include <asm/arch/sysmap-apq8016.h>
 
-#define CONFIG_MISC_INIT_R /* To stop autoboot */
+/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
+#define CONFIG_REMAKE_ELF
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM_1			0x80000000
-/* 1008 MB (the last ~30Mb are secured for TrustZone by ATF*/
-#define PHYS_SDRAM_1_SIZE		0x3da00000
+/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
+#define PHYS_SDRAM_1_SIZE		SZ_1G
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-#define CONFIG_SYS_TEXT_BASE		0x80080000
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x80000)
-#define CONFIG_SYS_BOOTM_LEN		0x1000000 /* 16MB max kernel size */
+#define CONFIG_SYS_BOOTM_LEN		SZ_64M
 
 /* UART */
 
 /* Generic Timer Definitions */
 #define COUNTER_FREQUENCY		19000000
 
-#define CONFIG_SYS_LDSCRIPT "board/qualcomm/dragonboard410c/u-boot.lds"
-
 /* Fixup - in init code we switch from device to host mode,
  * it has to be done after each HCD reset */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 
-/* Support all possible USB ethernet dongles */
-#define CONFIG_USB_ETHER_ASIX
-#define CONFIG_USB_ETHER_ASIX88179
-#define CONFIG_USB_ETHER_MCS7830
-#define CONFIG_USB_ETHER_SMSC95XX
-
-/* Extra Commands */
-/* Enable that for switching of boot partitions */
-/* Disabled by default as some sub-commands can brick eMMC */
-/*#define CONFIG_SUPPORT_EMMC_BOOT */
-
-/* Partition table support */
-#define HAVE_BLOCK_DEVICE /* Needed for partition commands */
-
-#include <config_distro_defaults.h>
-
 /* BOOTP options */
 #define CONFIG_BOOTP_BOOTFILESIZE
 
@@ -92,23 +71,16 @@ REFLASH(dragonboard/u-boot.img, 8)\
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"reflash="CONFIG_ENV_REFLASH"\0"\
 	"loadaddr=0x81000000\0" \
-	"fdt_high=0xffffffffffffffff\0" \
 	"initrd_high=0xffffffffffffffff\0" \
 	"linux_image=Image\0" \
 	"kernel_addr_r=0x81000000\0"\
-	"fdtfile=apq8016-sbc.dtb\0" \
+	"fdtfile=qcom/apq8016-sbc.dtb\0" \
 	"fdt_addr_r=0x83000000\0"\
 	"ramdisk_addr_r=0x84000000\0"\
 	"scriptaddr=0x90000000\0"\
 	"pxefile_addr_r=0x90100000\0"\
 	BOOTENV
 
-#define CONFIG_ENV_SIZE			0x2000
-#define CONFIG_ENV_VARS_UBOOT_CONFIG
-
-/* Size of malloc() pool */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + SZ_8M)
-
 /* Monitor Command Prompt */
 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
 #define CONFIG_SYS_MAXARGS		64	/* max command args */