X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdraco.h;h=4c67174572f3fe4f4cf7cb2f0a0b356251f48d6a;hb=HEAD;hp=02e935e64932d0c0c22ed4094e81013bfa43ceca;hpb=3bf5f13c0cda80cf1075c53862cb3ba998245cf8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/draco.h b/include/configs/draco.h
index 02e935e..4c67174 100644
--- a/include/configs/draco.h
+++ b/include/configs/draco.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Siemens Schweiz AG
  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -6,15 +7,11 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_DRACO_H
 #define __CONFIG_DRACO_H
 
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_DRACO
-
 #include "siemens-am33x-common.h"
 
 #define DDR_PLL_FREQ	303
@@ -22,64 +19,23 @@
 #define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
 
-#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+#define CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
 	"button_dfu0=27\0" \
 	"led0=103,1,0\0" \
 	"led1=64,0,1\0"
 
  /* Physical Memory Map */
-#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
-
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		100000
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
-#define EEPROM_ADDR_DDR3 0x90
-#define EEPROM_ADDR_CHIP 0x120
-
-#undef CONFIG_MII
-#define CONFIG_PHY_SMSC
-
-#define CONFIG_FACTORYSET
-
-/* Define own nand partitions */
-#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
-#define CONFIG_ENV_SIZE_REDUND      0x2000
-#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
-#ifndef CONFIG_SPL_BUILD
+#define CFG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
 /* Default env settings */
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CFG_EXTRA_ENV_SETTINGS \
 	"hostname=draco\0" \
 	"ubi_off=2048\0"\
 	"nand_img_size=0x400000\0" \
 	"optargs=\0" \
 	"preboot=draco_led 0\0" \
-	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
-	CONFIG_ENV_SETTINGS_V2 \
-	CONFIG_ENV_SETTINGS_NAND_V2
-
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-"if dfubutton; then " \
-	"run dfu_start; " \
-	"reset; " \
-"fi;" \
-"run nand_boot;" \
-"run nand_boot_backup;" \
-"reset;"
-
-#else
+	CFG_ENV_SETTINGS_BUTTONS_AND_LEDS \
+	CFG_ENV_SETTINGS_V2 \
+	CFG_ENV_SETTINGS_NAND_V2
 
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-#endif	/* CONFIG_SPL_BUILD */
 #endif	/* ! __CONFIG_DRACO_H */