X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdraco.h;h=4869008da440e084751b28c0bf0859aaed22ade4;hb=bf2c48fa1a6e068f232d84aae43b5dad654a9017;hp=ba6a43062a6301651f4e73c8e30c22a31902609e;hpb=d09ec7f81650425140776995fc9752189ddf7956;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/draco.h b/include/configs/draco.h
index ba6a430..4869008 100644
--- a/include/configs/draco.h
+++ b/include/configs/draco.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013 Siemens Schweiz AG
  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -6,20 +7,14 @@
  * U-Boot file:/include/configs/am335x_evm.h
  *
  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_DRACO_H
 #define __CONFIG_DRACO_H
 
-#define CONFIG_SIEMENS_DRACO
-#define CONFIG_SIEMENS_MACH_TYPE	MACH_TYPE_DRACO
-
 #include "siemens-am33x-common.h"
 
 #define DDR_PLL_FREQ	303
-#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
 
 #define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
 #define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
@@ -32,28 +27,6 @@
  /* Physical Memory Map */
 #define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */
 
-/* I2C Configuration */
-#define CONFIG_SYS_I2C_SPEED		100000
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
-#define EEPROM_ADDR_DDR3 0x90
-#define EEPROM_ADDR_CHIP 0x120
-
-#undef CONFIG_MII
-#undef CONFIG_PHY_GIGE
-#define CONFIG_PHY_SMSC
-
-#define CONFIG_FACTORYSET
-
-/* Define own nand partitions */
-#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
-#define CONFIG_ENV_SIZE_REDUND      0x2000
-#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)
-
-#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2
-
-#ifndef CONFIG_SPL_BUILD
-
 /* Default env settings */
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"hostname=draco\0" \
@@ -65,26 +38,4 @@
 	CONFIG_ENV_SETTINGS_V2 \
 	CONFIG_ENV_SETTINGS_NAND_V2
 
-#ifndef CONFIG_RESTORE_FLASH
-/* set to negative value for no autoboot */
-
-#define CONFIG_BOOTCOMMAND \
-"if dfubutton; then " \
-	"run dfu_start; " \
-	"reset; " \
-"fi;" \
-"run nand_boot;" \
-"run nand_boot_backup;" \
-"reset;"
-
-#else
-
-#define CONFIG_BOOTCOMMAND			\
-	"setenv autoload no; "			\
-	"dhcp; "				\
-	"if tftp 80000000 debrick.scr; then "	\
-		"source 80000000; "		\
-	"fi"
-#endif
-#endif	/* CONFIG_SPL_BUILD */
 #endif	/* ! __CONFIG_DRACO_H */