X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdra7xx_evm.h;h=aec70ee7182d3eb4d4a650fad718b4d229be7896;hb=504bf790da08db9b4a443566cf6ef577f9c7996a;hp=4b622365aed9180cfff289979bb521c6c7360346;hpb=9fd95ef0d39819fb27441fdd0f1b15b05d9b5085;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 4b62236..aec70ee 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -1,3 +1,4 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * (C) Copyright 2013
  * Texas Instruments Incorporated.
@@ -5,8 +6,6 @@
  *
  * Configuration settings for the TI DRA7XX board.
  * See ti_omap5_common.h for omap5 common settings.
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_DRA7XX_EVM_H
@@ -14,12 +13,9 @@
 
 #include <environment/ti/dfu.h>
 
-#ifdef CONFIG_SPL_BUILD
 #define CONFIG_IODELAY_RECALIBRATION
-#endif
 
 #define CONFIG_VERY_BIG_RAM
-#define CONFIG_NR_DRAM_BANKS		2
 #define CONFIG_MAX_MEM_MAPPED		0x80000000
 
 #ifndef CONFIG_QSPI_BOOT
@@ -47,31 +43,6 @@
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
 #ifndef CONFIG_SPL_BUILD
-/* Define the default GPT table for eMMC */
-#define PARTS_DEFAULT \
-	/* Linux partitions */ \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name=bootloader,start=384K,size=1792K,uuid=${uuid_gpt_bootloader};" \
-	"name=rootfs,start=2688K,size=-,uuid=${uuid_gpt_rootfs}\0" \
-	/* Android partitions */ \
-	"partitions_android=" \
-	"uuid_disk=${uuid_gpt_disk};" \
-	"name=xloader,start=128K,size=256K,uuid=${uuid_gpt_xloader};" \
-	"name=bootloader,size=1792K,uuid=${uuid_gpt_bootloader};" \
-	"name=environment,size=128K,uuid=${uuid_gpt_environment};" \
-	"name=misc,size=128K,uuid=${uuid_gpt_misc};" \
-	"name=reserved,size=256K,uuid=${uuid_gpt_reserved};" \
-	"name=efs,size=16M,uuid=${uuid_gpt_efs};" \
-	"name=crypto,size=16K,uuid=${uuid_gpt_crypto};" \
-	"name=recovery,size=40M,uuid=${uuid_gpt_recovery};" \
-	"name=boot,size=10M,uuid=${uuid_gpt_boot};" \
-	"name=system,size=768M,uuid=${uuid_gpt_system};" \
-	"name=vendor,size=256M,uuid=${uuid_gpt_vendor};" \
-	"name=cache,size=256M,uuid=${uuid_gpt_cache};" \
-	"name=ipu1,size=1M,uuid=${uuid_gpt_ipu1};" \
-	"name=ipu2,size=1M,uuid=${uuid_gpt_ipu2};" \
-	"name=userdata,size=-,uuid=${uuid_gpt_userdata}"
-
 #define DFUARGS \
 	"dfu_bufsiz=0x10000\0" \
 	DFU_ALT_INFO_MMC \
@@ -82,7 +53,7 @@
 
 #ifdef CONFIG_SPL_BUILD
 #undef CONFIG_CMD_BOOTD
-#ifdef CONFIG_SPL_DFU_SUPPORT
+#ifdef CONFIG_SPL_DFU
 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
 #define DFUARGS \
 	"dfu_bufsiz=0x10000\0" \
@@ -96,22 +67,11 @@
 #define CONFIG_HSMMC2_8BIT
 
 /* CPSW Ethernet */
-#define CONFIG_BOOTP_DNS		/* Configurable parts of CMD_DHCP */
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_SUBNETMASK
 #define CONFIG_NET_RETRY_COUNT		10
-#define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
-#define CONFIG_MII			/* Required in net/eth.c */
 #define CONFIG_PHY_TI
 
-/* SPI */
-#define CONFIG_TI_SPI_MMAP
-#define CONFIG_SF_DEFAULT_SPEED                76800000
-#define CONFIG_SF_DEFAULT_MODE                 SPI_MODE_0
-#define CONFIG_QSPI_QUAD_SUPPORT
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
@@ -127,7 +87,6 @@
 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
 #if defined(CONFIG_QSPI_BOOT)
 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 #define CONFIG_ENV_SIZE			(64 << 10)
 #define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64 KB sectors */
 #define CONFIG_ENV_OFFSET		0x1C0000
@@ -135,25 +94,15 @@
 #endif
 
 /* SPI SPL */
-#define CONFIG_TI_EDMA3
-#define CONFIG_SPL_SPI_LOAD
 #define CONFIG_SYS_SPI_U_BOOT_OFFS     0x40000
 
-#define CONFIG_SUPPORT_EMMC_BOOT
-
 /* USB xHCI HOST */
 #define CONFIG_USB_XHCI_OMAP
 
-#define CONFIG_OMAP_USB_PHY
 #define CONFIG_OMAP_USB2PHY2_HOST
 
 /* SATA */
-#define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
-#define CONFIG_SYS_SCSI_MAX_LUN		1
-#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
-						CONFIG_SYS_SCSI_MAX_LUN)
 
 /* NAND support */
 #ifdef CONFIG_NAND
@@ -177,7 +126,7 @@
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x000c0000
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00140000
 /* NAND: SPL related configs */
 /* NAND: SPL falcon mode configs */
 #ifdef CONFIG_SPL_OS_BOOT
@@ -192,11 +141,6 @@
 #define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_SYS_FLASH_SIZE		(64 * 1024 * 1024) /* 64 MB */
 /* #define CONFIG_INIT_IGNORE_ERROR */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
-#define CONFIG_SYS_FLASH_PROTECTION
-#define CONFIG_SYS_FLASH_CFI
-#define CONFIG_FLASH_CFI_DRIVER
-#define CONFIG_FLASH_CFI_MTD
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_FLASH_BASE		(0x08000000)
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE