X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdra7xx_evm.h;h=6cf716e293d6c5b6df190e3157db77adfaf083f8;hb=b8e09898919e23c5d7f1934be7bf9a3a6f0deb0e;hp=0ad23ce4b943720a69ea22ce2cd62ac0a36be4d9;hpb=3ff1ff3ff76c15efe0451309af084ee6c096c583;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 0ad23ce..6cf716e 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -20,8 +20,6 @@
 
 #ifndef CONFIG_QSPI_BOOT
 /* MMC ENV related defines */
-#define CONFIG_SYS_MMC_ENV_DEV		1	/* SLOT2: eMMC(1) */
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 #endif
 
 #if (CONFIG_CONS_INDEX == 1)
@@ -33,10 +31,6 @@
 #define CONFIG_SYS_NS16550_COM2		UART2_BASE	/* UART2 */
 #define CONFIG_SYS_NS16550_COM3		UART3_BASE	/* UART3 */
 
-#define CONFIG_ENV_EEPROM_IS_ON_I2C
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50	/* Main EEPROM */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
-
 #define CONFIG_SYS_OMAP_ABE_SYSCK
 
 #ifndef CONFIG_SPL_BUILD
@@ -49,9 +43,7 @@
 #endif
 
 #ifdef CONFIG_SPL_BUILD
-#undef CONFIG_CMD_BOOTD
 #ifdef CONFIG_SPL_DFU
-#define CONFIG_SPL_LOAD_FIT_ADDRESS 0x80200000
 #define DFUARGS \
 	"dfu_bufsiz=0x10000\0" \
 	DFU_ALT_INFO_RAM
@@ -63,12 +55,6 @@
 /* Enhance our eMMC support / experience. */
 #define CONFIG_HSMMC2_8BIT
 
-/* CPSW Ethernet */
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT		10
-#define CONFIG_PHY_TI
-
 /*
  * Default to using SPI for environment, etc.
  * 0x000000 - 0x040000 : QSPI.SPL (256KiB)
@@ -82,36 +68,13 @@
 #define CONFIG_SYS_SPI_KERNEL_OFFS	0x1E0000
 #define CONFIG_SYS_SPI_ARGS_OFFS	0x140000
 #define CONFIG_SYS_SPI_ARGS_SIZE	0x80000
-#if defined(CONFIG_QSPI_BOOT)
-#define CONFIG_ENV_SIZE			(64 << 10)
-#define CONFIG_ENV_SECT_SIZE		(64 << 10) /* 64 KB sectors */
-#define CONFIG_ENV_OFFSET		0x1C0000
-#define CONFIG_ENV_OFFSET_REDUND	0x1D0000
-#endif
 
 /* SPI SPL */
 
-/* USB xHCI HOST */
-#define CONFIG_USB_XHCI_OMAP
-
-#define CONFIG_OMAP_USB2PHY2_HOST
-
-/* SATA */
-#define CONFIG_SCSI_AHCI_PLAT
-
 /* NAND support */
-#ifdef CONFIG_NAND
+#ifdef CONFIG_MTD_RAW_NAND
 /* NAND: device related configs */
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					 CONFIG_SYS_NAND_PAGE_SIZE)
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
 /* NAND: driver related configs */
-#define CONFIG_SYS_NAND_ONFI_DETECTION
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_BCH8_CODE_HW
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	NAND_LARGE_BADBLOCK_POS
 #define CONFIG_SYS_NAND_ECCPOS		{ 2, 3, 4, 5, 6, 7, 8, 9, \
 					 10, 11, 12, 13, 14, 15, 16, 17, \
 					 18, 19, 20, 21, 22, 23, 24, 25, \
@@ -121,30 +84,14 @@
 					 50, 51, 52, 53, 54, 55, 56, 57, }
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	14
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x00140000
-/* NAND: SPL related configs */
-/* NAND: SPL falcon mode configs */
-#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x00200000 /* kernel offset */
-#endif
-#endif /* !CONFIG_NAND */
+#endif /* !CONFIG_MTD_RAW_NAND */
 
 /* Parallel NOR Support */
 #if defined(CONFIG_NOR)
 /* NOR: device related configs */
-#define CONFIG_SYS_MAX_FLASH_SECT	512
-#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
 #define CONFIG_SYS_FLASH_SIZE		(64 * 1024 * 1024) /* 64 MB */
-/* #define CONFIG_INIT_IGNORE_ERROR */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_FLASH_BASE		(0x08000000)
-#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
 /* Reduce SPL size by removing unlikey targets */
-#ifdef CONFIG_NOR_BOOT
-#define CONFIG_ENV_SECT_SIZE		(128 * 1024)	/* 128 KiB */
-#define CONFIG_ENV_OFFSET		0x001c0000
-#define CONFIG_ENV_OFFSET_REDUND	0x001e0000
-#endif
 #endif  /* NOR support */
 
 #endif /* __CONFIG_DRA7XX_EVM_H */