X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdnp1110.h;h=e48e20f6853f3d549fe85240dd4b092e9f81bb1f;hb=3df4f46f3209c067dcadc969ed02d27c97fa3632;hp=f3a871bda3f8d3df608325ba646fc8e5a35c9770;hpb=a8c7c708a9e0051c6358718c53572a4681eaa22b;p=platform%2Fkernel%2Fu-boot.git diff --git a/include/configs/dnp1110.h b/include/configs/dnp1110.h index f3a871b..e48e20f 100644 --- a/include/configs/dnp1110.h +++ b/include/configs/dnp1110.h @@ -31,8 +31,8 @@ * If we are developing, we might want to start armboot from ram * so we MUST NOT initialize critical regs like mem-timing ... */ -#define CONFIG_INIT_CRITICAL /* undef for developing */ -#undef CONFIG_INIT_CRITICAL /* undef for developing */ +#define CONFIG_SKIP_LOWLEVEL_INIT 1 +#undef CONFIG_SKIP_RELOCATE_UBOOT /* * High Level Configuration Options @@ -42,23 +42,27 @@ #define CONFIG_DNP1110 1 /* on an DNP/1110 Board */ #undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_NO_DCACHE /* * Size of malloc() pool */ -#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024) -#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ /* * Hardware drivers */ -#define CONFIG_DRIVER_SMC91111 +#define CONFIG_NET_MULTI +#define CONFIG_SMC91111 #define CONFIG_SMC91111_BASE 0x20000300 /* * select serial console configuration */ +#define CONFIG_SA1100_SERIAL #define CONFIG_SERIAL1 1 /* we use SERIAL 1 */ /* allow to overwrite serial and ethaddr */ @@ -66,13 +70,24 @@ #define CONFIG_BAUDRATE 115200 -#define CONFIG_COMMANDS (CONFIG_CMD_DFL) -/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ -#include +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + + +/* + * Command line configuration. + */ +#include + #define CONFIG_BOOTDELAY 3 -#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" +#define CONFIG_BOOTARGS "root=ramfs devfs=mount console=ttySA0,115200" #define CONFIG_ETHADDR 02:80:ad:20:31:b8 #define CONFIG_NETMASK 255.255.0.0 #define CONFIG_IPADDR 172.22.2.23 @@ -80,7 +95,7 @@ #define CONFIG_BOOTFILE "dnp1110" #define CONFIG_BOOTCOMMAND "tftp; bootm" -#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif @@ -88,25 +103,23 @@ /* * Miscellaneous configurable options */ -#define CFG_LONGHELP /* undef to save memory */ -#define CFG_PROMPT "DNP1110 # " /* Monitor Command Prompt */ -#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ -#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ -#define CFG_MAXARGS 16 /* max number of command args */ -#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ - -#define CFG_MEMTEST_START 0xc0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "DNP1110 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ -#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ +#define CONFIG_SYS_MEMTEST_START 0xc0400000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0xc0800000 /* 4 ... 8 MB in DRAM */ -#define CFG_LOAD_ADDR 0xc0200000 /* default load address */ +#define CONFIG_SYS_LOAD_ADDR 0xc0200000 /* default load address */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x0b /* set core clock to 220 MHz */ +#define CONFIG_SYS_HZ 3686400 /* incrementer freq: 3.6864 MHz */ +#define CONFIG_SYS_CPUSPEED 0x0b /* set core clock to 220 MHz */ /* valid baudrates */ -#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } /*----------------------------------------------------------------------- * Stack sizes @@ -132,20 +145,20 @@ #define PHYS_FLASH_BANK_SIZE 0x01000000 /* 32 MB Banks */ #define PHYS_FLASH_SECT_SIZE 0x00020000 /* 256 KB sectors (x2) */ -#define CFG_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 /*----------------------------------------------------------------------- * FLASH and environment organization */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ /* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */ +#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */ +#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */ -#define CFG_ENV_IS_IN_FLASH 1 -#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xF80000) /* Addr of Environment Sector */ -#define CFG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0xF80000) /* Addr of Environment Sector */ +#define CONFIG_ENV_SIZE 0x20000 /* Total Size of Environment Sector */ #endif /* __CONFIG_H */