X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdlvision-10g.h;h=e32651f5411307a8c7fada2324677d5fa7d90b13;hb=3bd25cb512b912e9c8e9074467e730a73f87371d;hp=17391cddc988529c2f1314125f61a443a4ea45b9;hpb=5b9c79a81db80c3f9e50c77477957cd803429af8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h
index 17391cd..e32651f 100644
--- a/include/configs/dlvision-10g.h
+++ b/include/configs/dlvision-10g.h
@@ -2,14 +2,13 @@
  * (C) Copyright 2010
  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
  *
- * SPDX-License-Identifier:	GPL-2.0+ 
+ * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
 #define CONFIG_405EP		1	/* this is a PPC405 CPU */
-#define CONFIG_4xx		1	/*  member of PPC4xx family */
 #define CONFIG_DLVISION_10G	1	/*  on a DLVision-10G board */
 
 #define	CONFIG_SYS_TEXT_BASE	0xFFFC0000
@@ -18,20 +17,14 @@
  * Include common defines/options for all AMCC eval boards
  */
 #define CONFIG_HOSTNAME		dlvsion-10g
-#define CONFIG_IDENT_STRING	" dlvision-10g 0.03"
 #include "amcc-common.h"
 
-#define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT
 
 #define CONFIG_SYS_CLK_FREQ	33333333 /* external frequency to pll   */
 
-#undef CONFIG_ZERO_BOOTDELAY_CHECK     /* ignore keypress on bootdelay==0 */
-#define CONFIG_AUTOBOOT_KEYED          /* use key strings to stop autoboot */
-#define CONFIG_AUTOBOOT_STOP_STR " "
-
 /*
  * Configure PLL
  */
@@ -39,8 +32,7 @@
 #define PLLMR1_DEFAULT PLLMR1_266_133_66
 
 /* new uImage format support */
-#define CONFIG_FIT
-#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+#define CONFIG_FIT_DISABLE_SHA256
 
 #define CONFIG_ENV_IS_IN_FLASH	/* use FLASH for environment vars */
 
@@ -65,9 +57,9 @@
 /*
  * Commands additional to the ones defined in amcc-common.h
  */
-#define CONFIG_CMD_CACHE
 #define CONFIG_CMD_DTT
 #undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_IRQ
 
 /*
  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
@@ -98,9 +90,28 @@
 /*
  * I2C stuff
  */
+#define CONFIG_SYS_I2C_PPC4XX
+#define CONFIG_SYS_I2C_PPC4XX_CH0
 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0		100000
+#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0		0x7F
+
+#define CONFIG_SYS_I2C_IHS
+#define CONFIG_SYS_I2C_IHS_DUAL
+#define CONFIG_SYS_I2C_IHS_CH0
+#define CONFIG_SYS_I2C_IHS_SPEED_0		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0		0x7F
+#define CONFIG_SYS_I2C_IHS_SPEED_0_1		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_0_1		0x7F
+#define CONFIG_SYS_I2C_IHS_CH1
+#define CONFIG_SYS_I2C_IHS_SPEED_1		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1		0x7F
+#define CONFIG_SYS_I2C_IHS_SPEED_1_1		50000
+#define CONFIG_SYS_I2C_IHS_SLAVE_1_1		0x7F
+
+#define CONFIG_SYS_SPD_BUS_NUM		4
 
 /* Temp sensor/hwmon/dtt */
+#define CONFIG_SYS_DTT_BUS_NUM	4
 #define CONFIG_DTT_LM63		1	/* National LM63	*/
 #define CONFIG_DTT_SENSORS	{ 0x4c, 0x4e, 0x18 } /* Sensor addresses */
 #define CONFIG_DTT_PWM_LOOKUPTABLE	\
@@ -108,6 +119,10 @@
 		  { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } }
 #define CONFIG_DTT_TACH_LIMIT	0xa10
 
+#define CONFIG_SYS_ICS8N3QV01_I2C	{1, 3}
+#define CONFIG_SYS_SIL1178_I2C		{0, 2}
+#define CONFIG_SYS_DP501_I2C		{0, 2}
+
 /* EBC peripherals */
 
 #define CONFIG_SYS_FLASH_BASE		0xFC000000
@@ -123,9 +138,15 @@
 
 #define CONFIG_SYS_FPGA_COUNT		2
 
+#define CONFIG_SYS_FPGA_PTR { \
+	(struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, \
+	(struct ihs_fpga *)CONFIG_SYS_FPGA1_BASE }
+
+#define CONFIG_SYS_FPGA_COMMON
+
 #define CONFIG_SYS_LATCH0_RESET		0xffff
 #define CONFIG_SYS_LATCH0_BOOT		0xffff
-#define CONFIG_SYS_LATCH1_RESET		0xffcf
+#define CONFIG_SYS_LATCH1_RESET		0xffbf
 #define CONFIG_SYS_LATCH1_BOOT		0xffff
 
 #define CONFIG_SYS_FPGA_NO_RFL_HI
@@ -145,7 +166,6 @@
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write/ms */
 
 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* use buff'd writes */
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* use hardware flash protect */
 
 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* 'E' for empty sector on flinfo */
 #define CONFIG_SYS_FLASH_QUIET_TEST	1	/* no warn upon unknown flash */
@@ -211,11 +231,10 @@
 #define CONFIG_SYS_OCM_DATA_ADDR	0xF8000000
 #define CONFIG_SYS_OCM_DATA_SIZE	0x1000
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
-#define CONFIG_SYS_INIT_RAM_END	CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
+#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_OCM_DATA_SIZE
 
-#define CONFIG_SYS_GBL_DATA_SIZE	128  /* size/bytes res'd for init data*/
 #define CONFIG_SYS_GBL_DATA_OFFSET \
-	(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
 
 /*
@@ -303,9 +322,9 @@
 /*
  * OSD Setup
  */
-#define CONFIG_SYS_ICS8N3QV01
 #define CONFIG_SYS_MPC92469AC
-#define CONFIG_SYS_SIL1178
 #define CONFIG_SYS_OSD_SCREENS		CONFIG_SYS_FPGA_COUNT
+#define CONFIG_SYS_DP501_DIFFERENTIAL
+#define CONFIG_SYS_DP501_VCAPCTRL0	0x01 /* DDR mode 0, DE for H/VSYNC */
 
 #endif	/* __CONFIG_H */