X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdisplay5.h;h=94baa6561022a864d04ca806903ba87e5d6abb7e;hb=5fdb3c0e7ee6bac6b8809ae69e52f16d22d45035;hp=1d3334ff12c92db4a78c878f96e5ae3517755686;hpb=75551c8bfc9545e31ec2ce238cac3857904007b8;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/display5.h b/include/configs/display5.h
index 1d3334f..94baa65 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -10,9 +10,7 @@
 #include "mx6_common.h"
 
 /* Falcon Mode */
-#define CONFIG_CMD_SPL
 #define CONFIG_SYS_SPL_ARGS_ADDR	0x18000000
-#define CONFIG_CMD_SPL_WRITE_SIZE	(44 * SZ_1K)
 
 /* Falcon Mode - MMC support */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x3F00
@@ -30,13 +28,16 @@
  * 0x020000 - 0x120000 : SPI.u-boot (1MiB)
  * 0x120000 - 0x130000 : SPI.u-boot-env1 (64KiB)
  * 0x130000 - 0x140000 : SPI.u-boot-env2 (64KiB)
- * 0x140000 - 0x540000 : SPI.swupdate-kernel-FIT (4MiB)
- * 0x540000 - 0x1540000 : SPI.swupdate-initramfs  (16MiB)
- * 0x1540000 - 0x1640000 : SPI.factory  (1MiB)
+ * 0x140000 - 0x740000 : SPI.swupdate-kernel-FIT (6MiB)
+ * 0x740000 - 0x1B40000 : SPI.swupdate-initramfs  (20MiB)
+ * 0x1B40000 - 0x1F00000 : SPI.reserved (3840KiB)
+ * 0x1F00000 - 0x2000000 : SPI.factory  (1MiB)
  */
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SPI_FLASH_MTD
+/* SPI Flash Configs */
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_DM_SPI
+#undef CONFIG_DM_SPI_FLASH
 #endif
 
 /* Below values are "dummy" - only to avoid build break */
@@ -45,7 +46,6 @@
 #define CONFIG_SYS_SPI_ARGS_SIZE        0x10000
 
 #include "imx6_spl.h"
-#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
@@ -58,32 +58,14 @@
 #define CONFIG_MXC_UART_BASE		UART5_BASE
 
 /* I2C Configs */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_MXC
-#define CONFIG_SYS_I2C_MXC_I2C1
-#define CONFIG_SYS_I2C_MXC_I2C2
-#define CONFIG_SYS_I2C_MXC_I2C3
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_I2C_EDID
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
-
-/* Ethernet */
-#ifdef CONFIG_FEC_MXC
-#define IMX_FEC_BASE			ENET_BASE_ADDR
-#define CONFIG_FEC_XCV_TYPE		RGMII
-#define CONFIG_ETHPRIME			"FEC"
-#define CONFIG_FEC_MXC_PHYADDR		0
-#endif
 
 /* MMC Configs */
-#define CONFIG_FSL_USDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_USDHC_NUM	2
 
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
-#define CONFIG_BAUDRATE			115200
 
 #ifndef CONFIG_BOOTCOMMAND
 #define CONFIG_BOOTCOMMAND "if run check_em_pad; then " \
@@ -356,18 +338,15 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Watchdog */
-#define CONFIG_WATCHDOG_TIMEOUT_MSECS   15000
+#if defined(CONFIG_SPL_BUILD)
+#undef CONFIG_WDT
+#undef CONFIG_WATCHDOG
+#define CONFIG_HW_WATCHDOG
+#endif
 
 /* ENV config */
 #ifdef CONFIG_ENV_IS_IN_SPI_FLASH
-#define CONFIG_ENV_SIZE		(SZ_64K)
 /* The 0x120000 value corresponds to above SPI-NOR memory MAP */
-#define CONFIG_ENV_OFFSET		(0x120000)
-#define CONFIG_ENV_SECT_SIZE		(SZ_64K)
-#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
-#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
-						CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #endif
 
 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)