X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdisplay5.h;h=6d00699ebd0187aa8cdfb74db842e5728821144a;hb=0223462b373b975d970fa86e5e1a7eadd1d41820;hp=f3c875738563556ab87ff144da22bb2ea28c34f6;hpb=de76610545f4350f8e3eac7c0c4ff6349106a9bf;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/display5.h b/include/configs/display5.h
index f3c8757..6d00699 100644
--- a/include/configs/display5.h
+++ b/include/configs/display5.h
@@ -36,9 +36,7 @@
  */
 
 #ifndef CONFIG_SPL_BUILD
-#define CONFIG_MTD_DEVICE
 #define CONFIG_SPI_FLASH_MTD
-#define CONFIG_MTD_PARTITIONS
 #endif
 
 /* Below values are "dummy" - only to avoid build break */
@@ -56,7 +54,6 @@
 
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(16 * 1024 * 1024)
-#define CONFIG_MISC_INIT_R
 
 /*#define CONFIG_MXC_UART*/
 #define CONFIG_MXC_UART_BASE		UART5_BASE
@@ -86,7 +83,6 @@
 #define CONFIG_FEC_XCV_TYPE		RGMII
 #define CONFIG_ETHPRIME			"FEC"
 #define CONFIG_FEC_MXC_PHYADDR		0
-#define CONFIG_MII
 #endif
 
 /* MMC Configs */
@@ -119,27 +115,6 @@
 	"name=rootfs2,size=512M,uuid=${uuid_gpt_rootfs2};" \
 	"name=data,size=-,uuid=${uuid_gpt_data}\0"
 
-#define FACTORY_PROCEDURE \
-	"echo '#######################';" \
-	"echo '# Factory Boot        #';" \
-	"echo '#######################';" \
-	"env default -a;" \
-	"saveenv;" \
-	"gpt write mmc ${mmcdev} ${partitions};" \
-	"run tftp_sf_SPL;" \
-	"run tftp_sf_uboot;" \
-	TFTP_UPDATE_KERNEL \
-	"run tftp_sf_fitImg_SWU;" \
-	"run tftp_sf_initramfs_SWU;" \
-	TFTP_UPDATE_ROOTFS \
-	"echo '#######################';" \
-	"echo '# END - OK            #';" \
-	"echo '#######################';" \
-	"setenv bootcmd 'env default -a; saveenv; run falcon_setup; reset';" \
-	"setenv boot_os 'n';" \
-	"saveenv;" \
-	"reset;"
-
 #define SWUPDATE_RECOVERY_PROCEDURE \
 	"echo '#######################';" \
 	"echo '# RECOVERY SWUupdate  #';" \
@@ -170,7 +145,7 @@
 		      "rootwait rootfstype=ext4 rw; " \
 	"run set_kernel_part;" \
 	"part start mmc ${mmcdev} ${kernel_part} lba_start; " \
-	"mmc read ${loadaddr} ${lba_start} 0x2000; " \
+	"mmc read ${loadaddr} ${lba_start} ${fitImg_fw_sz}; " \
 	"setenv fdt_conf imx6q-${board}-${display}.dtb; "
 
 /* All the numbers are in LBAs */
@@ -265,8 +240,6 @@
 	"bootdelay=1\0" \
 	"baudrate=115200\0" \
 	"bootcmd=" CONFIG_BOOTCOMMAND "\0" \
-	"factory=" FACTORY_PROCEDURE "\0" \
-	"bootlimit=3\0" \
 	"ethact=FEC\0" \
 	"netdev=eth0\0" \
 	"boot_os=y\0" \
@@ -278,6 +251,7 @@
 	"fdt_high=0xffffffff\0" \
 	"initrd_high=0xffffffff\0" \
 	"kernel_file=fitImage\0" \
+	"fitImg_fw_sz=0x2200\0" \
 	"up=run tftp_sf_SPL; run tftp_sf_uboot\0" \
 	"download_kernel=" \
 		"tftpboot ${loadaddr} ${kernel_file};\0" \
@@ -380,7 +354,6 @@
 #define CONFIG_SYS_HZ			1000
 
 /* Physical Memory Map */
-#define CONFIG_NR_DRAM_BANKS		1
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
 
@@ -393,8 +366,6 @@
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
 /* Commands */
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
 
 /* Watchdog */
 #define CONFIG_HW_WATCHDOG