X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdh_imx6.h;h=6aef15c658c0cc26b1b4f138a87da4365ad06fd5;hb=0613c36a7a5973d58a50b764ee647099e80cc97d;hp=178f5a6e7d60c674186d84b46ba3ab7be75624d0;hpb=085fea0b65c0aab6962e4e62c0fd376e3c63a90e;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/dh_imx6.h b/include/configs/dh_imx6.h
index 178f5a6..6aef15c 100644
--- a/include/configs/dh_imx6.h
+++ b/include/configs/dh_imx6.h
@@ -21,44 +21,27 @@
  * 0x12_0000-0x1f_ffff ... UNUSED
  */
 
-/* SPL */
-#include "imx6_spl.h"			/* common IMX6 SPL configuration */
-#define CONFIG_SPL_TARGET		"u-boot-with-spl.imx"
-
 /* Miscellaneous configurable options */
 
-/* Bootcounter */
-#define CONFIG_SYS_BOOTCOUNT_BE
-
 /* MMC Configs */
-#define CONFIG_SYS_FSL_ESDHC_ADDR	0
-#define CONFIG_SYS_FSL_USDHC_NUM	3
-
-/* SATA Configs */
-#define CONFIG_LBA48
+#define CFG_SYS_FSL_ESDHC_ADDR	0
+#define CFG_SYS_FSL_USDHC_NUM	3
 
 /* UART */
 #define CONFIG_MXC_UART_BASE		UART1_BASE
 
 /* USB Configs */
 #ifdef CONFIG_CMD_USB
-#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
-#define CONFIG_USB_MAX_CONTROLLER_COUNT	2 /* Enabled USB controller number */
 
 /* USB Gadget (DFU, UMS) */
 #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE)
 #define DFU_DEFAULT_POLL_TIMEOUT	300
-
-/* USB IDs */
-#define CONFIG_G_DNL_UMS_VENDOR_NUM	0x0525
-#define CONFIG_G_DNL_UMS_PRODUCT_NUM	0xA4A5
 #endif
 #endif
 
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_EXTRA_ENV_SETTINGS	\
+#define CFG_EXTRA_ENV_SETTINGS	\
 	"console=ttymxc0,115200\0"	\
 	"fdt_addr=0x18000000\0"		\
 	"fdt_high=0xffffffff\0"		\
@@ -70,8 +53,7 @@
 	"fdtfile=imx6q-dhcom-pdk2.dtb\0"\
 	"update_sf=" /* Erase SPI NOR and install U-Boot from SD */	\
 		"load mmc 0:1 ${loadaddr} /boot/u-boot-with-spl.imx && "\
-		"sf probe && sf erase 0x0 0xa0000 && "			\
-		"sf write ${loadaddr} 0x400 ${filesize}\0"		\
+		"sf probe && sf update ${loadaddr} 0x400 ${filesize}\0"	\
 	BOOTENV
 
 #define BOOT_TARGET_DEVICES(func) \
@@ -82,20 +64,13 @@
 	func(DHCP, dhcp, na)
 
 #include <config_distro_bootcmd.h>
-#endif
 
 /* Physical Memory Map */
 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
-#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
-#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
-
-#define CONFIG_SYS_INIT_SP_OFFSET \
-	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-
-#define CONFIG_SYS_INIT_SP_ADDR \
-	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+#define CFG_SYS_SDRAM_BASE		PHYS_SDRAM
+#define CFG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
+#define CFG_SYS_INIT_RAM_SIZE	IRAM_SIZE
 
 /* Environment */