X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit8000.h;h=c522d334dcc25fd773554070dcfa46ef9e1ed2f0;hb=4db386655a889b6466d2c3f40839ad21205c6d21;hp=f90c1c5a18a6738eaba145ceafdcff2db108d6ea;hpb=186529953fd10a97e6343418095edd1c535aaeb2;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index f90c1c5..c522d33 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -14,64 +14,16 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* High Level Configuration Options */
-#define CONFIG_MACH_TYPE	MACH_TYPE_DEVKIT8000
-
-/*
- * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
- * 64 bytes before this address should be set aside for u-boot.img's
- * header. That is 0x800FFFC0--0x80100000 should not be used for any
- * other needs.
- */
-
-#define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
-
-/*  Physical Memory Map  */
-
 #include <configs/ti_omap3_common.h>
 
-#define CONFIG_REVISION_TAG		1
-
-/* Size of malloc() pool */
-#undef CONFIG_SYS_MALLOC_LEN
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
-/* Hardware drivers */
-/* DM9000 */
-#define CONFIG_NET_RETRY_COUNT		20
-#define	CONFIG_DRIVER_DM9000		1
-#define	CONFIG_DM9000_BASE		0x2c000000
-#define	DM9000_IO			CONFIG_DM9000_BASE
-#define	DM9000_DATA			(CONFIG_DM9000_BASE + 0x400)
-#define	CONFIG_DM9000_USE_16BIT		1
-#define CONFIG_DM9000_NO_SROM		1
-#undef	CONFIG_DM9000_DEBUG
-
-/* TWL4030 */
-
-/* Board NAND Info */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
-
 /* BOOTP/DHCP options */
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_BOOTP_TIMEOFFSET
-#undef CONFIG_BOOTP_VENDOREX
+
+#define MEM_LAYOUT_ENV_SETTINGS \
+	DEFAULT_LINUX_BOOT_ENV
 
 /* Environment information */
-#define CONFIG_EXTRA_ENV_SETTINGS \
-	"loadaddr=0x82000000\0" \
+#define CFG_EXTRA_ENV_SETTINGS \
+	MEM_LAYOUT_ENV_SETTINGS \
 	"console=ttyO2,115200n8\0" \
 	"mmcdev=0\0" \
 	"vram=12M\0" \
@@ -134,44 +86,15 @@
 			"fi; " \
 		"else run nandboot; fi\0"
 
-#define CONFIG_BOOTCOMMAND "run autoboot"
-
-/* Boot Argument Buffer Size */
-
-/* SRAM config */
-#define CONFIG_SYS_SRAM_START              0x40200000
-#define CONFIG_SYS_SRAM_SIZE               0x10000
-
 /* Defines for SPL */
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
-#define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
+#define CFG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
 						10, 11, 12, 13}
 
-#define CONFIG_SYS_NAND_ECCSIZE		512
-#define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
-
-/* SPL OS boot options */
-#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
-
-#undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
-#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
-#undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
-#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */
+#define CFG_SYS_NAND_ECCSIZE		512
+#define CFG_SYS_NAND_ECCBYTES	3
 
-#undef CONFIG_SYS_SPL_ARGS_ADDR
-#define CONFIG_SYS_SPL_ARGS_ADDR        (PHYS_SDRAM_1 + 0x100)
+#define CFG_SYS_NAND_U_BOOT_SIZE	0x200000
 
 #endif /* __CONFIG_H */