X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit8000.h;h=340c9d0d4a30618d15ae2d59b622c8f61dc6651a;hb=10f6e4dc3a16c21f235416f975ecf2070ceb351f;hp=a2a1d93faa916ab6a9049f34cb88aac0bb142170;hpb=07298e4828b7d0904fbfd77d386f01b4a37a5609;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index a2a1d93..340c9d0 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -23,20 +23,12 @@
  * other needs.
  */
 
-#define CONFIG_SPL_BSS_START_ADDR       0x80000500 /* leave space for bootargs*/
-#define CONFIG_SPL_BSS_MAX_SIZE		0x80000
-
-#define CONFIG_SYS_SPL_MALLOC_START	0x80208000
-#define CONFIG_SYS_SPL_MALLOC_SIZE	0x100000	/* 1 MB */
-
 /*  Physical Memory Map  */
 
 #include <configs/ti_omap3_common.h>
 
 /* Hardware drivers */
 /* DM9000 */
-#define CONFIG_NET_RETRY_COUNT		20
-#define	CONFIG_DRIVER_DM9000		1
 #define	CONFIG_DM9000_BASE		0x2c000000
 #define	DM9000_IO			CONFIG_DM9000_BASE
 #define	DM9000_DATA			(CONFIG_DM9000_BASE + 0x400)
@@ -46,20 +38,7 @@
 
 /* TWL4030 */
 
-/* Board NAND Info */
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
-
 /* BOOTP/DHCP options */
-#define CONFIG_BOOTP_NISDOMAIN
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_TIMEOFFSET
-#undef CONFIG_BOOTP_VENDOREX
 
 /* Environment information */
 #define CONFIG_EXTRA_ENV_SETTINGS \
@@ -126,36 +105,22 @@
 			"fi; " \
 		"else run nandboot; fi\0"
 
-#define CONFIG_BOOTCOMMAND "run autoboot"
-
-/* Boot Argument Buffer Size */
-
 /* Defines for SPL */
 
 /* NAND boot config */
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-#define CONFIG_SYS_NAND_PAGE_COUNT	64
-#define CONFIG_SYS_NAND_PAGE_SIZE	2048
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_BLOCK_SIZE	(128*1024)
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
 #define CONFIG_SYS_NAND_ECCPOS		{2, 3, 4, 5, 6, 7, 8, 9,\
 						10, 11, 12, 13}
 
 #define CONFIG_SYS_NAND_ECCSIZE		512
 #define CONFIG_SYS_NAND_ECCBYTES	3
-#define CONFIG_NAND_OMAP_ECCSCHEME	OMAP_ECC_HAM1_CODE_HW
 
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x200000
 
 /* SPL OS boot options */
 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 
-#undef CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
 #undef CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
-#define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR	0x500 /* address 0xa0000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR	0x8   /* address 0x1000 */
 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS	8     /* 4KB */