X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit3250.h;h=bc5282a48934c03cb4da9d709ba14811b3da1ffe;hb=d2e5250be49fce4653689c41a5dc7e2d7e7ecf33;hp=33d71a7042ba58a4f15a50a44e61f0070ebf8ce8;hpb=5371593aed56ee11cbb6cc6ac8d058fcd9b8f58c;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 33d71a7..bc5282a 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -12,53 +12,26 @@
 #include <linux/sizes.h>
 #include <asm/arch/cpu.h>
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_DEVKIT3250
-
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
 /*
  * Memory configurations
  */
-#define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_64M
 
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_32K)
-
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
 					 - GENERATED_GBL_DATA_SIZE)
 
 /*
  * DMA
  */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_DMA_LPC32XX
-#endif
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C_LEGACY
-#define CONFIG_SYS_I2C_SPEED		100000
 
 /*
  * GPIO
  */
-#define CONFIG_LPC32XX_GPIO
-
-/*
- * Ethernet
- */
-#define CONFIG_RMII
-#define CONFIG_LPC32XX_ETH
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
 /*
  * NOR Flash
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	71
 #define CONFIG_SYS_FLASH_BASE		EMC_CS0_BASE
 #define CONFIG_SYS_FLASH_SIZE		SZ_4M
@@ -82,9 +55,6 @@
 #define CONFIG_LPC32XX_NAND_SLC_RHOLD		200000000
 #define CONFIG_LPC32XX_NAND_SLC_RSETUP		50000000
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE		0x20000
-#define CONFIG_SYS_NAND_PAGE_SIZE		NAND_LARGE_BLOCK_PAGE_SIZE
-
 /*
  * USB
  */
@@ -105,14 +75,6 @@
  * Environment
  */
 
-#define CONFIG_BOOTCOMMAND			\
-	"dhcp; "				\
-	"tftp ${loadaddr} ${serverip}:${tftpdir}/${bootfile}; "		\
-	"tftp ${dtbaddr} ${serverip}:${tftpdir}/devkit3250.dtb; "	\
-	"setenv nfsargs ip=dhcp root=/dev/nfs nfsroot=${serverip}:${nfsroot},tcp; "	\
-	"setenv bootargs ${bootargs} ${nfsargs} ${userargs}; "			\
-	"bootm ${loadaddr} - ${dtbaddr}"
-
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"autoload=no\0"				\
 	"ethaddr=00:01:90:00:C0:81\0"		\
@@ -126,15 +88,6 @@
  */
 
 /*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
-#define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_LOADADDR			0x80008000
-
-/*
  * SPL specific defines
  */
 /* SPL will be executed at offset 0 */
@@ -155,7 +108,6 @@
 #define CONFIG_SPL_PAD_TO		CONFIG_SPL_MAX_SIZE
 
 /* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x60000
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE