X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit3250.h;h=8e8ea56f3cfa5089b083d74c7f13cedb4ec13a52;hb=92832045c54586e9dffa082ff8cd8c2ef6040757;hp=4c0229e4cc8177dc554b8e9d53be24e25006d4cb;hpb=5bec37eb72bdb43d683593148f4911f1e1f34980;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 4c0229e..8e8ea56 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -12,44 +12,18 @@
 #include <linux/sizes.h>
 #include <asm/arch/cpu.h>
 
-#define CONFIG_MACH_TYPE		MACH_TYPE_DEVKIT3250
-
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
 /*
  * Memory configurations
  */
-#define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_64M
-#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + SZ_32K)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - SZ_1M)
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_32K)
 
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
 					 - GENERATED_GBL_DATA_SIZE)
 
 /*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART		5   /* UART5 */
-
-/*
  * DMA
  */
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_DMA_LPC32XX
-#endif
-
-/*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_LPC32XX
-#define CONFIG_SYS_I2C_SPEED		100000
 
 /*
  * GPIO
@@ -57,11 +31,6 @@
 #define CONFIG_LPC32XX_GPIO
 
 /*
- * SSP/SPI
- */
-#define CONFIG_LPC32XX_SSP_TIMEOUT	100000
-
-/*
  * Ethernet
  */
 #define CONFIG_RMII
@@ -95,9 +64,6 @@
 #define CONFIG_LPC32XX_NAND_SLC_RHOLD		200000000
 #define CONFIG_LPC32XX_NAND_SLC_RSETUP		50000000
 
-#define CONFIG_SYS_NAND_BLOCK_SIZE		0x20000
-#define CONFIG_SYS_NAND_PAGE_SIZE		NAND_LARGE_BLOCK_PAGE_SIZE
-
 /*
  * USB
  */
@@ -138,14 +104,7 @@
  * U-Boot Commands
  */
 
-/*
- * Boot Linux
- */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-
 #define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_LOADADDR			0x80008000
 
 /*
  * SPL specific defines
@@ -161,16 +120,13 @@
 
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_DRIVERS
 
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SPL_MAX_SIZE		0x20000
 #define CONFIG_SPL_PAD_TO		CONFIG_SPL_MAX_SIZE
 
 /* U-Boot will be 0x60000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x40000
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	0x60000
 
 #define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_TEXT_BASE