X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit3250.h;h=4ef61e94c6107c35b28f498fb9faac15fdbe9dc2;hb=7cfbba36e9f84312afe8cd6d12db4e9e9c1e04b5;hp=ae9e4d4a2c88f6bd6a982056c02c3d79592e60d7;hpb=504bf790da08db9b4a443566cf6ef577f9c7996a;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index ae9e4d4..4ef61e9 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -14,32 +14,16 @@
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_DEVKIT3250
 
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
-#if !defined(CONFIG_SPL_BUILD)
-#define CONFIG_SKIP_LOWLEVEL_INIT
-#endif
-
 /*
  * Memory configurations
  */
-#define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_64M
-#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + SZ_32K)
-#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - SZ_1M)
-
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_32K)
 
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + SZ_4K \
 					 - GENERATED_GBL_DATA_SIZE)
 
 /*
- * Serial Driver
- */
-#define CONFIG_SYS_LPC32XX_UART		5   /* UART5 */
-
-/*
  * DMA
  */
 #if !defined(CONFIG_SPL_BUILD)
@@ -47,27 +31,14 @@
 #endif
 
 /*
- * I2C
- */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_LPC32XX
-#define CONFIG_SYS_I2C_SPEED		100000
-
-/*
  * GPIO
  */
 #define CONFIG_LPC32XX_GPIO
 
 /*
- * SSP/SPI
- */
-#define CONFIG_LPC32XX_SSP_TIMEOUT	100000
-
-/*
  * Ethernet
  */
 #define CONFIG_RMII
-#define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
@@ -100,7 +71,6 @@
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE		0x20000
 #define CONFIG_SYS_NAND_PAGE_SIZE		NAND_LARGE_BLOCK_PAGE_SIZE
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /*
  * USB
@@ -121,8 +91,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_SIZE			SZ_128K
-#define CONFIG_ENV_OFFSET		0x000A0000
 
 #define CONFIG_BOOTCOMMAND			\
 	"dhcp; "				\
@@ -151,7 +119,6 @@
 #define CONFIG_SETUP_MEMORY_TAGS
 
 #define CONFIG_BOOTFILE			"uImage"
-#define CONFIG_LOADADDR			0x80008000
 
 /*
  * SPL specific defines
@@ -167,9 +134,7 @@
 
 /* SPL loads an image from NAND */
 #define CONFIG_SPL_NAND_RAW_ONLY
-#define CONFIG_SPL_NAND_DRIVERS
 
-#define CONFIG_SPL_NAND_ECC
 #define CONFIG_SPL_NAND_SOFTECC
 
 #define CONFIG_SPL_MAX_SIZE		0x20000