X-Git-Url: http://review.tizen.org/git/?a=blobdiff_plain;f=include%2Fconfigs%2Fdevkit3250.h;h=4c0229e4cc8177dc554b8e9d53be24e25006d4cb;hb=306881a0bfca22798da64f55206ef2824f37efed;hp=226c1d2bba9293131bea06197d3e17f81eb1f42c;hpb=5619295995e3262bb5770e8b5e945ffdc5442145;p=platform%2Fkernel%2Fu-boot.git

diff --git a/include/configs/devkit3250.h b/include/configs/devkit3250.h
index 226c1d2..4c0229e 100644
--- a/include/configs/devkit3250.h
+++ b/include/configs/devkit3250.h
@@ -1,9 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Embest/Timll DevKit3250 board configuration file
  *
  * Copyright (C) 2011-2015 Vladimir Zapolskiy <vz@mleia.com>
- *
- * SPDX-License-Identifier:	GPL-2.0+
  */
 
 #ifndef __CONFIG_DEVKIT3250_H__
@@ -15,8 +14,6 @@
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_DEVKIT3250
 
-#define CONFIG_SYS_ICACHE_OFF
-#define CONFIG_SYS_DCACHE_OFF
 #if !defined(CONFIG_SPL_BUILD)
 #define CONFIG_SKIP_LOWLEVEL_INIT
 #endif
@@ -24,11 +21,9 @@
 /*
  * Memory configurations
  */
-#define CONFIG_NR_DRAM_BANKS		1
 #define CONFIG_SYS_MALLOC_LEN		SZ_1M
 #define CONFIG_SYS_SDRAM_BASE		EMC_DYCS0_BASE
 #define CONFIG_SYS_SDRAM_SIZE		SZ_64M
-#define CONFIG_SYS_TEXT_BASE		0x83F00000
 #define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + SZ_32K)
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_TEXT_BASE - SZ_1M)
 
@@ -64,16 +59,13 @@
 /*
  * SSP/SPI
  */
-#define CONFIG_LPC32XX_SSP
 #define CONFIG_LPC32XX_SSP_TIMEOUT	100000
 
 /*
  * Ethernet
  */
 #define CONFIG_RMII
-#define CONFIG_PHY_SMSC
 #define CONFIG_LPC32XX_ETH
-#define CONFIG_PHY_ADDR			0x1F
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
 
 /*
@@ -83,12 +75,10 @@
 #define CONFIG_SYS_MAX_FLASH_SECT	71
 #define CONFIG_SYS_FLASH_BASE		EMC_CS0_BASE
 #define CONFIG_SYS_FLASH_SIZE		SZ_4M
-#define CONFIG_SYS_FLASH_CFI
 
 /*
  * NAND controller
  */
-#define CONFIG_NAND_LPC32XX_SLC
 #define CONFIG_SYS_NAND_BASE		SLC_NAND_BASE
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
@@ -107,7 +97,6 @@
 
 #define CONFIG_SYS_NAND_BLOCK_SIZE		0x20000
 #define CONFIG_SYS_NAND_PAGE_SIZE		NAND_LARGE_BLOCK_PAGE_SIZE
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
 
 /*
  * USB
@@ -118,16 +107,9 @@
 /*
  * U-Boot General Configurations
  */
-#define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE		1024
-#define CONFIG_SYS_PBSIZE		\
-	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_AUTO_COMPLETE
-#define CONFIG_CMDLINE_EDITING
-
 /*
  * Pass open firmware flat tree
  */
@@ -135,8 +117,6 @@
 /*
  * Environment
  */
-#define CONFIG_ENV_SIZE			SZ_128K
-#define CONFIG_ENV_OFFSET		0x000A0000
 
 #define CONFIG_BOOTCOMMAND			\
 	"dhcp; "				\
@@ -171,18 +151,15 @@
  * SPL specific defines
  */
 /* SPL will be executed at offset 0 */
-#define CONFIG_SPL_TEXT_BASE		0x00000000
 
 /* SPL will use SRAM as stack */
 #define CONFIG_SPL_STACK		0x0000FFF8
 
 /* Use the framework and generic lib */
-#define CONFIG_SPL_FRAMEWORK
 
 /* SPL will use serial */
 
 /* SPL loads an image from NAND */
-#define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_NAND_RAW_ONLY
 #define CONFIG_SPL_NAND_DRIVERS